-
if you had a mm32spin0x board please create a new layout and hopefully help us make the blink code run on it
currently the progress is 90% complete
motor and uart control works
https://github…
-
M10CUBE format CNC Brakeout Nucleo64
-
Hi,
has anyone gotten the IPS50 working?
I am running `Armbian_23.05.0-trunk_Mkspi_bullseye_edge_6.1.28.img` which works perfectly with the MKS SKIPR.
The touch is working fine (it is reacting to…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Version
equal or higher than v1.16.0 and lower than v1.17.0
### What happened?
Hi there!
- on EKS 1.28, t…
-
Hardware: SAMA5D4Xplained dev board + ATWILC1000-SD (rev 4) dev board
Software: wilc_demo 15.2RC1 from:
https://github.com/linux4wilc/wilc_demo/tree/009b36048d18ffb64b2140eeecd0194cc21cbfd4
Upd…
HDC67 updated
4 years ago
-
So the above mentioned monitor only switches to HDMI.
If I have it connected to my desktop on DP and switch with:
`ddcutil setvcp --bus=12 60 0x12`
to HDMI then all is fine.
However if I …
-
In GitLab by @ghost1 on Nov 30, 2021, 13:50
Hi,
Trying to write a PIC12F675 with http://www.leapsecond.com/pic/src/pd11.hex
(I also reassembled the file in case the web version is broken but that di…
-
*bittorf:*
after flashing r2919 i can see strange message with dmesg:
root@lede:~ dmesg | grep -i jffs
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ …
-
*bittorf:*
after flashing r2919 i can see strange message with dmesg:
root@lede:~ dmesg | grep -i jffs
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ …
-
----
### Issue details
I am Using the /mavros/rc/override topic to publish input values to an sitl simulation of the iris drone.
I followed all the proper steps, and sent the following channel…