-
I plan to undertake a two motor / encoder version of the software. Let me know if there are technical issues or if someone tried and failed.
I intend to use the pin change interrupts and the http…
-
## Feature request
Add support for Marlin controllers: http://marlinfw.org/
It may not be the first alternative for CNC machines as it's mostly focused on 3D printing. But the firmware supports co…
-
Hi All,
I have a zynq 7000 board with an 88E6390 switch running linux kernel 6.1.30. The ports 3, 9 and 10 are external ports and another port is connected to zynq mac. port 3 is connected to pt…
-
**Describe the bug**
An immense number of the files `#include`d in `common.h` do not exist when following the steps listed at [Rapid IoT - Getting Started](https://nxp.gitbook.io/hovergames/addons/ra…
-
trying to run moveit servo for ur10 robot but it fails **#1194**
i am correctly passing the servo yaml config but still no success
it always throws error [moveit_robot_model.robot_model]: Link '…
-
-
# Description
This issue is a tracker of the compile time configurations.
After some offline discussions with some RIOT maintainers we came to the conclusion it¡s a good idea to first **identify t…
-
Check out the Freenove example code and AdaFruit Neopixel code to see how you can do this. After you've figured out how to turn those particular lights on and the correct color, create a library…
-
Raising/Lowering a Sit/Standing Desk manually is _lame_ and means someone with reduced mobility (_or strength_) cannot operate it without assistance. (_I have a relative with [MS](https://en.wikipedia…
-
The invalid position error frequently pops up; haven't yet found a reliable recovery. Suggestions?
In GC, using the B08 command always works. In WC, it triggers the error again.