-
**Is your feature request related to a problem? Please describe.**
Sometimes we need to control 3D Printing parameters while Cura and PC are not powered on.
**Describe the solution you'd like**
…
-
**Is your feature request related to a problem? Please describe.**
When using my Pinecil V2 for embedding brass inserts into 3D prints, maintaining the soldering iron perfectly perpendicular to the i…
-
### Tested versions
- Reproducible in: 4.4.dev https://github.com/godotengine/godot/commit/e3213aaef5e0e72b8272e65d989d3d8222be17ca
- Not reproducible in: 4.3.stable, 4.4.dev1, 4.4.dev2
### Sys…
-
### Is there an existing issue for this feature request?
- [X] I have searched the existing issues
### Is your feature request related to a problem?
Dear Orca Slicer Developers,
I would like to …
-
### Tested versions
Tested in v4.3.stable.official [77dcf97d8]
### System information
Godot v4.3.stable - Windows 10.0.19045 - Vulkan (Forward+) - dedicated AMD Radeon RX 6800 XT (Advanced Micro De…
-
add a live activity for ios that allows the printers status from the lock screen or from the dynamic island.
-
I was able to print this PCB and install the lag tester software from pthalin. The phototransistor doesn't seem to be able to detect light from my monitors though. If I shine a bright flashlight on th…
-
Hi @SaibotFlow , huge thanks for providing the code! I alrady bought the reed sensor option when i saw your post. Makes things much more cleaner and easier.
However with the Arduino Nano the previo…
-
I have a k1 max, and i would like to use this nice monitor. I installed it and connected it to my wifi. I entered the ip adres of my rooted k1 max and i get this in the serial:
idle screen:
k1ma…
-
### Version
2.3.55.5
### Operating system type + version
Xubuntu 20.04
### 3D printer brand / version + firmware version (if known)
N/A
### Behavior
* Select "Print host upload queue" fro…