-
### Describe the bug
### To Reproduce
Run two captures at the same time, one using candump with hardware timestamps :
`candump -ta -H can1
`
The other utilising python-can e.g. log…
-
The layer.conf says that it is compatible with every release from sumo through to kirkstone.
However, `canutils.bb` has pre-honister override syntax:
https://github.com/ZoranStojsavljevic/meta-s…
-
Are there any plans to add CAN frame parsing to this crate? Maybe something similar to your [CANutils](https://github.com/marcelbuesing/canutils-rs) CLI but for use as a library? I'm happy to help wit…
-
Error when compiling. Long int vs unsigned int.
``` Console
-- Build files have been written to: /home/iain/PX4-firmware/build/nxp_ucans32k146_default
[39/321] Generating apps/libapps.a
FAILED: …
-
Hello Everyone, Please help mee
- I activate CAN0 Pins, IP route2 and CANUTILS from the kernel. I boot the device and turn it on. but when I do Candump can0 the message does not come. The cansend c…
-
SocketCAN allows to source hardware timestamp for all frames received through certain interface.
Currently using `candump .. -H` results in printing times of 1970 which means that this information …
-
FromCanUtilsLog.py fails to reformat lines without data after the arbid
Example
(1672682646.133427) can0 0E0014F2#
The Holley terminator x for some reason will create messages with no data lik…
-
### Describe the bug
There’s a problem bothering me. Why is the Ethernet device missing after configuring the CAN port?
```
nsh> ifconfig
can0 Link encap:UNSPEC at DOWN
inet addr:0.0.0.0 DRadd…
-
1. sllin built-in module and boot message
[ 1.527834] sllin: serial line LIN interface driver
[ 1.528527] sllin: 10 dynamic interface channels.
[ 1.529148] sllin: Break is generated manual…
-
*marconi:*
Supply the following if possible:
- Device problem occurs on
I tried it on GL-AR150, but it should reproduce on any device w/ USB
- Software versions of LEDE release, packages, …