-
Hi.
Possible to team up with @Lupinixx and get his work of iNav implementation into official version?
https://github.com/Lupinixx/LuaPilot_Taranis_Telemetry_Cleanflight_INAV
-
Hi guys!
Looks like you guys are doing some good work here. Cleanflight v1.13.0-RC1 was created yesterday and is a stable codebase from which to further develop your changes.
Could you start creati…
hydra updated
7 years ago
-
Hi!
I can see in pyMultiWii.py that line:
> Modification required on Multiwii firmware to Protocol.cpp in evaluateCommand:
Is the modification still necessary? The cleanflight code got changed ove…
Arise updated
6 years ago
-
https://github.com/cleanflight/cleanflight/blob/master/docs/Serial.md
https://flyingmodscom.files.wordpress.com/2017/06/cleanflight-manual.pdf
-
**Target name**
AG3X
**Branch location**
Master https://github.com/jflyper/cleanflight/tree/bfdev-ag3x
3.3.1 Maintenance https://github.com/jflyper/cleanflight/tree/bfdev-ag3x-3.3.x-maint
**C…
-
I'd like to use MAVROS to publish data coming from the Mavlink output on a Cleanflight fc. I understand that this isn't a supported controller/typical use case, but was curious if it's possible. I c…
-
Hi, great project you have here.
I would like for lighttelemetry to be supported. It is a low baudrate protocol at 1200 or 2400 baud it transmitts all the needed telemetry for an antenna tracker and…
-
Hello.
I thought it would be good to see the section Motor test as it looks in cleanflight\betaflight configurators
![clip2net_161227133028](https://cloud.githubusercontent.com/assets/13326299/21492…
-
Hi 我刚买了crazepony2 带有红色壳子的版本
我希望使用最新的cleanflight/betaflight固件。
但是刷完官方发布的SPRACINGF3固件发现不能正常运作（刷了CF1.14、CF2.1、BF3.2）
通过cleanflight 的CLi得到Crazepony2 1.0 版固件是基于CF1.13，所以应该是能够支持CF/BF最新的固件的。
所以我想问问在制作C…
-
It would be rad if we could control WS2812 addressable LEDs like http://multirotormania.com/led-lighting/989-mrm-cleanflight-5050-ws2812-programmable-led-bar-70mm.html or http://multirotormania.com/le…
fujin updated
9 years ago