-
Hi,
Homing only moves one motor at a time all other corexy movements (jogging etc) are ok.
https://github.com/gnea/grbl-Mega/issues/49#issue-285545751
A workaround was posted in the issue above but…
-
1. New parts for the new [o-rings](https://prusa.io/ring):
- corexy-tensioner R3.stl - sep. 24
- corexy-back-right-top R6.stl - sep. 24
- corexy-back-left-top R5.stl
- y-carriage-left-base R6.stl
…
-
### Describe the feature or hardware support you'd like
It would be great to support hybrid_corexy machines like the upcoming RatRig V-Core 4 or other builds like idex machines since they create much…
-
SOLVED: im using a hbot system, i had to choose the midtbot kinematics, NOT the corexy kinematics.
### Wiki Search Terms
Used these Pins http://wiki.fluidnc.com/en/hardware/3rd-party/MKS_DLC32
…
-
Hi everyone,
I am in the process of building a Pick-And-Place machine (OpenPNP) and I am currently using the excellent Duet Mini 5+. I was thinking about the feasibility to go Closed Loop for the Cor…
-
Is this board able to control a corexy printer? Thank you.
-
### What happened
I have hybrid hardware, and it was initially enabled, but due to doing some debugging I set it to CoreXY mode.
Rather than changing my wiring, instead when I changed to corexy, I…
-
Ive made some tests with CoreXY kinematics with a proto made with corexy.org files. I hacked kinematics.c and that works. However, i don't know how to integrate it properly in the software architectur…
-
Rick,
I made a polargrah like Sandy Nobles and a corexy like Axidraw.
Both can be controlled by your controller. Its clear that both Repetier and Marlin support them. But how about the penplott…
-
Good evening my friends, im Brazilian, so Im sorry about my bad english.
So... I will try to do a new 3d printer machine and I decided to do a corexy 500*500*500mm ass well. My question is someone ha…