-
Hi,
Can you please help out with pinout and config for CRTouch?
Thanks!
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The pin definitions for SERVO0_PIN, Z_MIN_PROBE_PIN and FIL_RUNOUT_PIN are possibly inc…
-
The CRTouch device has a TouchPending signal, used to signalize new data available. eGUI does not use the signal, it reads the RTSRDY field of the Resistive Touch Status Register 1 instead. That cause…
-
This is a catch-all for all "me too" configuration requests. If you can submit partly or fully working configs for printers we don't yet support, please do, as we rely on owners of machines to test an…
-
When I use the command "TEMPERATURE_PROBE_CALIBRATE PROBE=btt_eddy TARGET=56 STEP=4", I get the error "Invalid STEP and/or TARGET parameters resulted in too few expected samples: 1". What could that b…
-
I have an ender 3 max, with sprite extruder pro, CRTouch and dual z. Im trying to compile my self a marlin with and got nowhere, heheh then i came a cross with your BIN. it works perfectly. but i can'…
-
Hi
I am Not that proficient with configuring my printer, so please excuse silly questions:)
I downloaded the binary and updated my Ender 3 max with your Firmware.
Since i installed a crtouch Aut…
-
I'm facing an issue with BLTouch/CRTouch on my SKR E3 Turbo converted Ender3.
It's actually very similar issue as what's reported on SKR Mini E3. (https://github.com/bigtreetech/BIGTREETECH-SKR-mini-…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
The Automatic Tramming Wizard is only probing the most extreme points (almost off the plate) whi…
-
My Ender 3 pro is having a software issue very similar to a pid issue back in 2021. I have recently upgraded to a crtouch and updated the software but ever since I cannot get it to heat to operating t…