-
# Description
**CC:** @SeanTedesco
- A "flatsat" is a 2D layout of sub-system modules with corresponding connectors and harnessing.
- All components of the EPS sub-system will be laid out onto a t…
-
We need the ability to update software on non-C3 Ocatvo cards, like the star tracker, GPS, DxWiFi, and CFC.
The steps are something like this:
- Create software update file and test extensively …
-
Create a version of the Main Sim that can be used for flatsat. This will coexist with the current `Main_Sim.slx`, but contain read/write libraries for hardware communication.
-
We need the ability to update firmware on STM32 cards on the OreSat CAN bus.
The steps are something like this:
- Create firmware update and test extensively on flatsat
- Upload firmware update…
-
When running rollcall at 1.25Hz, after powering off flatsat, COSMOS still seems to get data from `CAN_LOCAL` for a while. The issue does not appear to be happening with rollcall at 0.17 Hz.
-
The IMU was sending terrible data (-140 deg/s on the X axis) until I flipped the byte order in 6b49b6d96c59c9420dff5e7dab85c8260e58f0a7. I tilted the flatsat on each axis and the readings are much mor…
-
Just imports, before we get to running any functional code, take a significant amount of the startup time for `oresat-c3-software`. I took a profile of imports during start-up with `python3 -X importt…
-
-
How can NOS3 run with Hardware in the loop?
This may involve the HWLIB. Here is a diagram from [Matt Grubb's Thesis](https://researchrepository.wvu.edu/cgi/viewcontent.cgi?article=9091&context=etd)…
-
It would be very helpful if a .WAV file of sample MinXSS-2 packets could be provided so that we could verify the proper function of the new decoder.
Thanks!
-Scott, K4KDR
K4KDR updated
5 years ago