-
Thanks for reading.
I'd like to see more euro/aus activity and to that end, I'd like to suggest daily bridge operations rather than weekly.
I'd also like to suggest a proposal for v/uhf station…
-
Make a view that allows for creating and downloading CSV files in the [Chirp](https://chirp.danplanet.com/projects/chirp/wiki/CSV_HowTo) format, like so:
```
Location,Name,Frequency,Duplex,Offset,To…
-
I've been using SDR-trunk to broadcast my county's analog public safety system to broadcastify and I love the setup and user interface of the software. But there are some issues I've stumbled into. Th…
-
Hi, I have noticed CW ID does not TX with CTCSSTone. I get a silent TX when using Tone Squelch... OR am I missing something ?
m0llc updated
5 months ago
-
Hi,
I have been running kalibrate-rtl in an effort to confirm my manual calibration results. Kalibrate-rtl returns crystal correction values around -24 ppm while using known beacons the manual calib…
-
Since "issues" here are also about "new ideas", then I have a question: Do you know, if the squelch calibration values are hidden somewhere in the firmware? Is it possible to recalibrate squelch to hi…
-
I am using the latest firmware 0.22 on a UV-K5(8).
I have noticed on several occasions that when I am listening to a station on 2m and I have the radio set of NFM (which is correct for the UK band …
-
The Radioddity GD77 radio has had quite a few firmware update/upgrades. And some of these, unfortunately, have required the user to re-build their GD77 codeplug from the ground up. For example, see …
-
In relation to filters,
1.- Is there any way to control Audio Filters?
2.- if so, is there ay way to control the low and high cut frequency? For Wefax sometimes it is needed to reduce adjacent no…
-
The local Amateur Radio Club Repeater near me uses YSF.
I was wondering if you can add support for this, or if its already implemented why isn't it listed as YSF in the encoders