-
It would be nice to have support for `gf180mcuC`, so that we can get some ideas of how many projects are "portable" and if they require any other configuration update beside setting a different `PDK` …
-
Again I am not sure if this is the right place. The tech lef for gf180mcu has `USEMINSPACING` set to `ON` which is in my opinion mostly dangerous. Setting it to `OFF` is more conservative and I don't …
-
Using GF180MCU, I got hat error :
Running Magic on input file poly_subs_w_0p18.tcl
Running magic -dnull -noconsole -rcfile /usr/local/share/pdk/gf180mcuD/libs.tech/magic/gf180mcuD.magicrc poly_subs…
-
It seems that the current implementation strips the `outputs` section when rendering `meta.yaml` thus preventing the tool to "prepare" recipe with subpackages.
Example:
```
# Rendered by conda-bu…
-
## Expected Behavior
gf180mcu_fd_ip_sram__sram256x8m8wm1 should have A[7:0]
gf180mcu_fd_ip_sram__sram512x8m8wm1 should have A[8:0]
gf180mcu_fd_ip_sram__sram64x8m8wm1 should have A[5:0]
## Actu…
-
Hello,
I have recently installed klayout on my Mac and added sky130 libraries to do some layout.
However, when I launch the klayout after adding the library, klayout won't stop launching new win…
-
### Description
I encountered an error when trying to switch the technology node from SKY130nm to GF180mcu in OpenLane. Despite changing the configuration file, the tool fails to run and shows a vers…
-
The available IO liberties for typical process are
```
gf180mcuA/libs.ref/gf180mcu_fd_io/liberty/gf180mcu_fd_io__tt_025C_2v50.lib
gf180mcuA/libs.ref/gf180mcu_fd_io/liberty/gf180mcu_fd_io__tt_025C_…
-
So that analog projects can be submitted to GF-MPW1+
-
I am having issues extracting both `gds` and `mag` using magic. For example the `gf180mcu_fd_sc_mcu7t5v0__clkbuf_8` cell in the extracted spice has wrong ports `w_n86_352#` and `VSUBS`
```
.subckt g…