-
allow users to connect a hardware wallet directly so they can see and control interaction between a hardware wallet and nakamochi's node on the touchscreen, such as making transactions.
this needs …
-
On the Rev 1 DDRM, the MIDI input uses a 6n138 5V optocoupler, but powers it using 3V3. Incoming MIDI messages are sometimes garbled and often lead to stuck notes when DDRM is sequenced over MIDI. My …
-
There are currently many emulators that support using SCCI to control real OPLL or PSG chips to listen to music. It would be great if openmsx could support such a feature.
-
Currently, ESP-Miner is very focused on Bitaxe hardware. It would be great to implement a set of refactors to ease the integration of other hardware (e.g. non-Bitaxe, Bitaxe-custom hardware, etc.). …
-
### Problem
Hi, I think it would be valuable to be able to monitor the hardware statistics of network interfaces.
This would allow you to see things like queue overruns, checksum errors and other…
-
### NetBox version
4.06
### Feature type
New functionality
### Proposed functionality
adding a new interface type for radio systems, which use N-type, TNC, or BNC connectors on the hardware. such…
-
Hi,
I think it would be great if the pcan driver also supports HW-Filtering.
As I found out in the PCAN Basic API Documentation that should be possible.
cheers
mathias
-
Hi Miguel,
I'm triying tu use the ur_modern_driver, The Problem that i developed a controller work good with gazebo but when i shift to the real robot i've noticed that in the ur_hardware_interface t…
-
Hi!
Nice work on the driver! Looking forward to testing it at some point. Do you have any plans for implementing ros_control/[robot_hardware_interface](http://wiki.ros.org/hardware_interface)?
-
Good day.
I am able to compile in ARduino IDE 2.3.2 the Telegram example for ESP8266, but I am getting a lot of timer errors when compiling the Telegram example for ESP32. See below. Any solution…