-
One can fit the device with a Pico 2 RP2350 board, the VM works fine, disk access to SD card and the RGB LED are working, but the LCD shows garbage. Tried with SPI clock frequencies in the rage 5 - ~4…
-
Hi all,
after a couple of days of always ON working, I’ve notice that the animation transition time become very slow. You need to wait sometimes also 30/40s to see the leds reaching the brightness…
-
When using a design that involves the clock of the tangprimer20k, the bitcode created does not properly work on the bord itself. When using the gowin toolchain (IDE or via `gw_sh`), it runs fine.
T…
-
The PCB has ~3 degrees C of self-heating.
![Figure_1](https://github.com/user-attachments/assets/f2f8c81b-ffa5-41c4-b28d-9e37ea747ea0)
Putting the PCB in an enclosure will make the effect wors…
-
After reports of many users that latest tnCartWonder bitstreams were not booting into their MSXs when using WonderTANG! V2.0b boards (and strangely my Panasonic FS-A1WSX and Toshiba HX-10 were not aff…
-
### Affected hardware version
Bangle 2
### Your firmware version
2v24
### The bug
With active (loaded) music control app, a notification alarm doesn't stop after the configured timeout,…
-
Hi all,
After trying to resolve the issue 46 by unplug and plug the power a couple of time also waiting more than 5 minutes between the unplug and plug, I’ve noticed that the color red during the s…
-
was running the latest 'b50' beta , did several 'reboot services' [t-shoot play local music]; decided to check my 'notification Bell icon'.
08_08b1 was available - told Neon to go ahead.
AS it did t…
-
Hello,
I have had no luck getting APA102 working with 3.5 version of FastLED library on the Ultimate Maker Feather S2 board (um_feathers2). The LED just would not respond/turn on. To fix the issue,…
-
Cannot get the RGB_LED.ino to work. it seems related to the FastLED library. (I tried different versions without success)
The project builds and uploads but the RGB LED does not work and when conne…