-
- Noseover Speed (ft/s) - default 0
- Drogue Method (Height or Delay)
- Drogue Height AGL - default 1,500ft
- Drogue Second Delay - default ?
- Drogue Sensor Mixing (BME280, MS5611) - default OR…
-
Hey how do I change the accelerometer direction? Because I have already mounted it in another direction and it's quite hard to remover and re attach it. Also is ms5611 at mpu6050 slave?
-
-
Hi,
Many thanks for making your work available for others to look at.
I am trying out
MPU9250/MPU9250_MS5611_BasicAHRS_t3.ino
on a Arduino Nano modified for 3.3V with a CJMCU-117 ebay board.
…
Gord1 updated
2 years ago
-
Hello,
I have got a small PCB board which has GPS(BN220) connected and it works fine
```
Second analog to digital sensor is not detected
Foreseen GPS type is Ublox (configured by oXs) :GPS i…
-
After updating my raspberry pi, python, and blinky I'm having trouble with the MS.adafruit_MS5611 library import.
-
### Describe the bug
With the Pixhawk 6x + MS5525DSO Airspeed sensor, Master PX4 FW, the air speed went through calibration, but it did not require blowing into the tube. After going through calibrat…
-
The Directory sw_stm32/Drivers/Custom is not clean.
- Interfaces and Naming not homogeneous (uart6.cpp, usart_1_driver.cpp)
- Some are old and unused (fxos8700*, L3GD20_gyro.cpp, stm_l3gd20.cp…
-
# Expected Behavior
Steady pressure readings directly after startup.
# Current Behavior
Pressure reading is drifting.
# Failure Information (for bugs)
Apparently the ms5611 temperatur…
-
Koc kodu incelerken aşağıdakileri gördüm, değiştirmedim ama sorayım dedim.
------------------------------------------------------------------------------------------------
1- BUZZER_PWM_CHANNEL şekl…