-
### Is there an existing core-v-mcu bug for this?
- [X] I have searched the existing bug issues
### Bug Description
Hello there,
I've been working on core-v-mcu for a little bit of time. I'm cur…
-
Hello! Thank you for this wonderful project, Mr. Tarassov.
I wish to add a CAN peripheral. Would you recommend doing this using the provided [Vivado CANFD IP](https://www.xilinx.com/products/intel…
ahmrr updated
8 hours ago
-
This is observed when connecting a PicoLemon HyperRAM module to the PMODs of a QMTech Wukong board.
I suspect the problem is due to the increased latency through the board traces and PMODs.
-
that would give an output similar to what you'd get with Mike's pmod
https://discord.com/channels/1009193568256135208/1255160614246944851/1256337836614095022
-
https://wiki.sipeed.com/hardware/zh/tang/tang-PMOD/FPGA_PMOD.html
-
Hi,
It seems [PMOD is a standard](https://en.wikipedia.org/wiki/Pmod_Interface) and the RA6, RA8, and RX72 boards are supporting it. Would make sense to order a few PMOD displays and show case all…
-
My SD Card is no longer being read. I'm likely on TFCARD V1. Is there any support for this? Primer 25k
-
Hi, it would be great if you could try it with a DVI PMOD too,
I made a 16-bit version (RGB-565) of the icebreaker-pmod that should be possible to handsolder.
https://github.com/jbilander/icebreaker…
-
hola! no entiendo porque con la linea destacada con rosado puedo concluir lo destacado con amarillo
![SmartSelect_20240706_200740_Samsung Notes](https://github.com/IIC1253/IIC1253-2024-1/assets/10656…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…