-
**Note:** See the [Adding an MDS Provider ID](https://github.com/openmobilityfoundation/mobility-data-specification/wiki/Adding-an-MDS-Provider-ID) page for more help.
Opening this issue will allow…
-
# Setup
I have 2 machines running ubuntu 20.04 and ROS Noetic on the same network:
- Machine 1 is for running a gazebo simulation (Alias: "FMS")
- Machine 2 is for spawning the robot in the simulat…
-
Dear afharo,
sorry for bothering you with this issue again:
I tried to connect my S6 again as it is connected to a new router.
As already mentioned this is the log file:
Logfile
[9/1/2024, 10:1…
-
To be able to reach the Robot StarterApp from the HubCluster we need to have a domain that is resolved by the Router ( ".lan" ) and then matches the basedomain and Route of Microshift on the robot.
…
-
**Is your feature request related to a problem? Please describe.**
When developing a custom robot, our driver was freezing when connecting to a particular motor. This resulted in the `/controller_man…
-
We are currently on Harbor 2.9.1 - I've been experimenting with Harbor 2.10.0 and ran into some blockers due to the way we currently use Harbor.
We provide Harbor as a service internally within our…
-
From [the roadmap](https://github.com/Yaskawa-Global/motoros2/blob/f61a7238d78066aa565542b6fefd112bad42d0cb/README.md#provisional-roadmap):
> The following items are on the MotoROS2 roadmap, and ar…
-
I am trying to write a C++ EtherNet/IP Adapter that will communicate with a FANUC robot configured as a Scanner. Unfortunatelly, after exchanging 3 messages I get `recv() error: Connection reset by pe…
-
**Is your feature request related to a problem? Please describe.**
Vision Language Models are useful for understanding based on images. In robotics, the environment is dynamic and images from camera …
-
### Describe the feature request
I'd like it if there was a simple method of advertising items and services in this game.
> As a foreword, I recommend even non-xenobiologists read this section. So…