-
German:
keine Bindung mit Dsm2 mit der neuen lua script .auf Sender x18 firmware 1.5.11 ..Das modul auch auf neuste update gebracht.
Verschiedene empfänger benutz kein erfolg. nur mit im auto bindin…
-
It seems that the Futaba servo used in the project (RS303MR or RS204MD) are out-of-stock at Futaba USA, and I can't find them anywhere else. https://futabausa.com/product-category/servos/robot-servos…
-
Need the servos to work as described in prior communication. X_o to X_F when "s" is fired.
whfel updated
6 years ago
-
Implement PWM control servos. This should include a wrapper API and a higher level get_angle, set_angle, etc. It should have an init function to configure GPIOs if needed.
https://docs.espressif.…
-
### Situation
While learning the dome panels/servos, I noticed that the new MK4 dome is a problem. There are two new panels in the lower dome area and an ‘old’ one, which is known as S4 for the MK3 d…
-
Using a 2 axis servo gimbal on a quadcopter on main branch, Ark Fmu-V6x FC with control allocation, dshot output on outputs 1-4 (motors), and PWM 400hz on outputs 5&6 for gimbal servos.
mnt_mode_i…
-
Hey I'm new to coding and tried to make this work for 12 servos... and failed. I'm running low on time. Anyway you can throw out a 12 servo Arduino option? (can just copy movement from some the other …
-
Servos twitching during unit testing of assembly in various locations.
It appears that there may be some kind of electrical issue affecting the circuit due to the large power draw of servos.
-
Nothing happens whenever i use Zmax or M5 Stop pins as servos. Only Bltouch works. But i need at least bltouch and another servo working.
I redefined pins and change num_servo to 2. no luck
-
Sending the signal to the servos has a very long delay.
- Questions raised:
- Are servos in series the only option, or can groups be placed in parallel?
- Use of communication between wireless ESP