-
### Checklist
- [X] I have tried the latest version of BMS_BLE-HA.
- [X] I have enabled debug logging for my installation.
- [X] This issue only contains 1 issue (if you have multiple issues, open on…
-
Lynx Smart BMS NG support was added earlier in [this issue](https://github.com/victronenergy/venus-private/issues/258), but gui-v2 is not mentioned here.
I checked the fields mentioned in [this com…
-
Hello,
the format of voltage and current in MQTT are different by BMS and Victron Smart Shunt.
Example:
- Serial 0 Victron SmartShunt
totalVoltage = 5218
totalCurrent = -4686
- Serial 2 JK-Inv…
-
Currently, the GX alarm relay only triggers on alarms. Should there be an exception for Lynx Smart BMSes (and possibly other devices as well) to trigger the alarm relay on warnings? The purpose of thi…
-
Hi, I'm googling around and found this.
I have 3 different LFP batteries connected to my Deye hybrid inverter.
I also have a Victron Smart Shunt connected.
The inverter can only connect to one BM…
-
Hi, I see that you are implementing a tripower smart energy SMA but will it also be compatible with single-phase ones? i.e. with Sunny Boy Smart Energy?
Will this protocol be implemented with batrium…
-
Is the Smart BMS JK-PB2A16S-20P with Active Balancer supported by this integration? This is the new model that talks to inverters.
https://www.jkbms.com/product/jk-pb2a16s20p-jk-pb2a16s-20p/
-
Either via UART, UART over power line, or Bluetooth
UART -- nRF52840 has 2 UARTs, so we can use the other one
UART over powerline -- save on cabling, and reuse the existing power connection
-
I have been looking to find a BMS that is compatible with ardupilot for use on ROVER and have been struggling to find anything that you can actually buy without emailing the company just to get a pric…
-
### Is your feature request related to a problem? Please describe.
as discussed here
https://github.com/helgeerbe/OpenDTU-OnBattery/pull/1214#issuecomment-2329737784
### Describe the solution you'…