-
Add HWLIB support for SpaceWire
-
If anybody comes across an extra satellite they can loan me for a bit to do some protocol development, let me know...
-
### The problem
Have only checked this with CMOS 1, but after sending [`shutdown` command](https://github.com/foxsi/foxsi4-commands/blob/f87194c9b60665866041013c5ecaf2559c97ec38/commands/cmos1/cmos1_…
-
### The trouble
Applies to [v0.1.0](https://github.com/foxsi/foxsi-4matter/releases/tag/v0.1.0).
When applying uplink commands to CMOS, the reply is not read (it remains in the Eth receive buffe…
-
> (Commentary: it honestly baffles me why this technology didn't become more dominant in the microcontroller world. This technology seems quite the no-brainer compared to RS-232 or SPI.)
Whenever I…
-
# SpaceWire In-System Test
## Description
SIST port is port 19 of GR718B. The SIST allows direct access to the switch matrix of the router
The SIST module is connected to SpaceWire router via a…
-
### The trouble
In `*_commands.json` command files, there are fields like this:
```json
"address":"0x00"
```
When they are parsed into a `std::vector` by `string_to_chars(std::string hex_str)`,…
-
@gjsmo @sbergested
Can you guys read the doc and select the design you like?
-
(this text is paraphrased from some conversations on Teams)
Investigate whether JPEG-LS lossless compression is a viable option as a compression technique for quickly reading off images from the ca…
-
State change causing EEPs (from: MEB RUN / FEE/ TEST CONNECTION to: MEB CONFIG)