-
Hello, it would be cool if bcnc could have tangential knife option.
I think it could be done just on bcnc side, no need to change grbl stock firmware.
Z axis pin could be used for rotational/ ta…
-
### Machine Context
I have a Chinese CNC die-cutter (2000 x 1000) equipped with tangential knife unit and a diode laser. The machine has 3 axis : XY and C to rotate the knife. The knife is moved up a…
-
Greetings all,
I've taken on the challenge of building a tangential knife machine, and I was hoping to use g2 firmware for control. Over the course of the day I've been able to get a reasonable grasp…
-
I think this has been reported before, but I was unable to find the issue it was mentioned in (if it was previously reported). The Steam Workshop upload tool is missing some tags that were previously …
-
As outlined [here](https://github.com/FormerLurker/ArcWelderLib/issues/70#issuecomment-1148269124) I'm using ArcWelder to prepare files for CNC cutting using a tangential knife. Apart from the former …
-
Hi, When i start the 4D A tangential machine, A axis rotates correctly in linear shapes, but in curved shapes it rotates differently than the simulation. What is the reason for this?
video:
https:…
-
I'm making 4 axis tangential knife CNC CoreXY machine with BTT-SKR 2.0 controller (STM32F407) and I have several issues.
1. The hard limit switch of rotational axis is proximity switch with physical …
-
Hi there,
if i want to try reverse selected path, so tool go originally from up to down and I want to reverse it - start down and go up:
![IMG_9411](https://github.com/svenhb/GRBL-Plotter/assets/…
-
I made tangential knife for cutting and now have some strange issue.
I open the SVG file in GRBL-Plotter and it generates g-code. G-code for first figure generated cutting direction by CW and cutti…
-
I see templates are used for metadata.rb, README, etc. for the cookbook generator, however, I'm not sure how to specify author_name, *email, licence, etc. Is there any way to read those from knife.rb…