-
Hi,
Thank you for theTMC2209 esphome component, done some testing durring the weekend and I don't think the setting :
`rms_current_hold_scale: 0% `
Is working, I noted the TODO text.
/kennet…
-
I had problems getting TMC2209 step sticks working with UART configuratio in Marlin 2.x..
Some Bigtree TMC2208 before were working correctly, so I was debugging the case.
Problem is on these TMC22…
-
Hello, I will be using a teensy 4.1 and 2 TMC2209 V1.3s wired directly without a shield.
For the 2209 V1.3, is spreadcycle the default mode? If not, how do I switch it?
If I just have to us…
-
`C:\..Path..\libraries\TMC2209\src\TMC2209\TMC2209.cpp: In member function 'void TMC2209::setup(SoftwareSerial&, long int, TMC2209::SerialAddress)':
C:\..Path..\libraries\TMC2209\src\TMC2209\TMC2209.…
-
Hello, Thanks a lot for this lib, I really appreciate the fact that every settings are so clear.
I was using TMCstepper lib before with accelstepper and I'am currently trying to migrate my code to yo…
-
Hello. I have the problem to probably connect to the uart of the TMC 2209. I have some experiences with Arduino and stepper drivers, but not that much to be able to figure out what my issue is. I used…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Hello
I have a five motors 17HS4401 with TMC2209 on scr 1.4. All motors operate correc…
-
TMC2209 V4.0 spider v3.0
I am getting Unable to read tmc uart 'stepper_x' register IFCNT
I have tried 2 diffrent jumper configs off the wireing diagram 1 on the PDN pin
also tried all 4 …
-
Hello Gherkin,
I'd like to know if you actually went ahead and used it in your projects ? Were you happy with it? It looks pretty neat and exactly the kind of little pcb I'd like.
Would you co…
-
### Is your feature request related to a problem? Please describe.
Marlin has experimental support for `SPI_ENDSTOPS`, which negates the need for hardwiring a wire from DIAG0 to end stop pins. Howeve…