-
I am getting this error message when running Arducam_tof_camera/build/example/cpp/example and Arducam_tof_camera/build/example/cpp/preview_depth targets.
Running the code on an Arducam TOF camera w…
-
Hello!
On the microSD card, I flashed Ubuntu Version 22.04.5 for 64 bit and I am using a Raspberry Pi 4. All I need to do is turn on the camera module and record my findings. I have followed the o…
-
Both examples
```
cd Arducam_tof_camera/example
mkdir build && cd build
cmake .. && make
```
and
```
cd Arducam_tof_camera/pcl_preview
mkdir build && cd build
cmake ..
…
-
Raspberry Pi4 + Arducam ToF Camera.
When I try to run example "preview_depth" I get error "Failed to start camera" with error code ArducamSystemError (-2). What does it mean? Something wrong with …
-
Hi~ we have tested Arducam IMX316 ToF camera module on Raspberry Pi 4 which are confused on:
1.There are a big different distance results with three ROI on same object(smooth plane) as attached pic…
-
When building for Mac, the following error occurs:
```
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and t…
-
Hi, is it possible to connect multiple Arducam tof sensors to jetson nx module running jetpack 5 ?
If yes, could you list carrier boards or hats for it ?
Thanks,
-
Hi Team,
I am trying to simulate a ToF camera, and for that purpose used the as sensor type. But I am unable to use intrinsics and distortion parameters.
Please can someone suggest how this can …
-
I want to install Arducam ToF Camera on Jetson Nano (L4T 32.6.1)
but failed to complie.
What should I do?
First, I ran Install_dependencies.sh
```
Get:1 file:/var/cuda-repo-l4t-10-2-local In…
-
Hi there,
we are trying to extract point cloud data from the raw frame, like wise you guys did using TOF module. used some formulas to generate but could not be able to match the point cloud gen…