-
```
echo 'SUBSYSTEM=="tty", ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", SYMLINK+="gnss%n", SYMLINK+="ublox-m8-%n", MODE="0666"' > ./99-ublox-m8.rules
```
```
sudo cp ./99-ublox-m8.rules /et…
-
Maybe I missed something, but I couldn't spot anywhere in your code where you are setting the dynamic model of the uBlox GNSS chipset.
If you don't set this to one of the airborne dynamic models (I r…
-
基本的には[このissue](https://github.com/open-rdc/orne_navigation/issues/454)を読めば解決はすることと思う．
実験装置：jetsonでないPC
GNSSレシーバの動作確認と手順を示すことを目的に本issueを作成した．
GNSSレシーバを接続するためのgithubのリポジトリのインストールと接続方法
`git clo…
-
- [x] Configure and log RTK+PPP (@edwinrainville) (#175)
- [x] Get access to ublox PointPerfect (@edwinrainville any news on this?)
- [x] Read and transmit ublox telegrams using sfy (@gauteh) (requi…
-
**Describe the bug**
Using a ZED-F9P with the latest firmware available on the ublox website. Launching the drivers with the following configuration file leads to the error (shown after cfg)
``…
-
Mr. Lappalainen
I have a Garmin GPSMAP 923 which requires GarminGPS module over NMEA2000. But **I don't want to buy new** device anymore.
Can I redirect my ublox data to GPSMAP 923?
Best rega…
thknx updated
3 months ago
-
When I use the GPS data of the dataset, the following error occurs. How should I solve it? Does anyone understand?
[ERROR] [1726843140.213914157]: Client [/lio_sam_mapOptmization] wants topic /ublox_…
Anqfl updated
1 month ago
-
Does this library work with UBLOX-MAX-M10 ?
-
I'm using 2 different f9p kits. The C099 evel kit and the new EVK eval kit. Both from ublox.
The C099 works flawless!
However the EVK throws the following error (with the exact same working config):…
-
Hi there,
I intend to use [SKPOS](https://www.skpos.gku.sk/en/) provider to receive the RTCM corrections to Ublox ZED F9P module. Unfortunately, the corrections are not received due to connection dro…