-
Hi – I'm using this crate to drive a ZED-F9P module over i2c. I'm in the process of adding the necessary code for supporting PPP-RTK (roughly following [this example](https://github.com/sparkfun/Spark…
-
Hello Rob,
Question whether ubxlib has an interface to report status of the MIA M10 Gnss receiver, such as hardware status or I/O subsystem.
M10 interface Manual available here:
https://content.u…
-
I would like to ask the developers to add some simple functions:
- A function to vary the GPS update frequency
- A function to disable NMEA sentences and use the UBX protocol
- A function that al…
-
## Current Behavior
Upgrading my Nano Talon to iNav 7 and GPS stops working.
Upgraded my Nano Talon from 6.1.1 to 7.1.1 and restored DIFF and config as usual, no issues, but never actually checked…
-
-
Hello,
I seem to encounter strange behavior while trying to use my M8N receiver with 2.01 firmware version with RTKLIB 2.4.2 release. I am on Windows.
[NOTE] I have just tried the 2.4.3 b33 and I ha…
-
Maybe I missed something, but I couldn't spot anywhere in your code where you are setting the dynamic model of the uBlox GNSS chipset.
If you don't set this to one of the airborne dynamic models (I r…
-
Is it possible to use this library on the UBX M8P for RTK purpose (base-station)?
- configure dynamic model
- get the RTCM3 corrections (1005, 1077 and 1087)
If not, do you plan on supporting it,…
-
Hi,
the module_DGPS mentions "DGPS injection support for SBP/RTCP/UBC"
What are these protocols?
Is "SBP" like SBAS? Is "RTCP" a typo of RTCM? And is "UBC" the U-blox UBX protocol?
Thanks …
-
Using an OEM H7 you can't get a GPS to work, using the GPS port or CAN, neither show up with `gps status`
```
NuttShell (NSH) NuttX-10.1.0
nsh> gps status
INFO [gps] Main GPS
INFO [gps] protocol: UB…