-
i did this
`flutter pub add drago_usb_printer`
and after i did this
` List devices = [];
void getDevices() async {
List results = [];
results = await DragoUsbPrinter.getUSBDe…
-
Is it possible to add support for [...](https://en.wikipedia.org/wiki/USB#Device_classes)?
- [ ] USB hub
- [ ] Human interface device (HID) [Joystick/Gamepad](https://github.com/crazii/SBEMU/issues/…
-
Dear GLPi user.
BEFORE SUBMITTING YOUR ISSUE, please make sure to read and follow these steps :
* Verify that your question has not already been asked
* Please use the below template.
* Delete…
-
how can i print to a printer on the usb port?
-
Is there any way to add remote printing? E.g. by adding the printer to CUPS as "RAW" on the remote and local device?
I am aware of USB/IP, which somewhat might work. However I would like to allow m…
-
### Printer model
XL Multi Tool (5 toolheads) with Enclosure
### Firmware version
6.1.3+7898 XL [S] [A]
### Upgrades and modifications
Prusa Enclosure
### Printing from...
USB Drive
### Descri…
-
I don't have any hardware for this device, but if anyone's interested to take apart their printer here's what is currently useful:
- The pinout of the cable to USB signals
- A high resolution phot…
-
### Printer model
MK4
### Firmware version
6.0.3
### Upgrades and modifications
_No response_
### Printing from...
USB Stick
### Describe the bug
Folders containing .bgcode …
-
Hello, i have problem with x-plus 3 printer after update klipper via web interface, printer wrote: MCU protocol error, older version firmware runing on MCU. I try update via USB flash disk, but printe…
-
[klippy-8.log.zip](https://github.com/user-attachments/files/16754946/klippy-8.log.zip)
Getting Error where Klipper shuts down randomly
Our previous convo located here:
https://github.com/pr…