-
Thank you for submitting your feedback to the ADVi3++ project.
Please be sure to review the checklists below before submitting and use one of the templates.
**It is mandatory**. If you do not c…
-
Please, can you share how to build the firmware for the printer?, What microcontroller, processor, etc, and specially the GPIO pins set at micro-controller startup?.
Thanks I'm stopped in this part…
-
Your Name: Andrei Pozolotin
Printer Vendor: Wanhao
Printer Base Model: Duplicator-6
Purpose of customization: Original Firmware
-
Dear JeremyProffitt,
can I use your Firmware also for the Wanhao D9/500? I got a Volcano hotend and have to change the thermistor type and would like to enable the PID tuning for the bed.
Best
-
Hi!
I have a Replicator 1 dual extruder clone - Wanhao Duplicator 4, upgraded to Sailfish firmware.
I think it's strange, but files converted with GPX report wrong progress - it starts somewhere aroun…
-
Today, there are many different clones of the Wanhao Duplicator i3 Plus, with small differences. In order to better support them in ADVi3++, I am trying to get an exhausitve list of these clones. So f…
-
Your Name:
Gary Zimmer
Printer Vendor:
Wanhao
Printer Base Model:
Duplicator 6
Purpose of customization:
Higher Hot End and Build Plate Temps
Possibly a Capacitive Proximity Detector/Z-probe (…
-
My Photon S now the touchpoint and the button on-screen is not the same position. So how can I calibrate it? I try to flash new firmware but I can not select the .bin file b/c the button now is lower …
-
The error I get is this:
`'DIO49_DDR' was not declared in this scope`
Set the board to Melzi and select the RepRapDiscount LCD.
It seems to be some kind of issue with SDCARDDETECT, but I really …
-
Hello, I don't know if this is the right way to report a bug or suggestion but under the option for "Other" printers, I noticed there is a Cocoon Create ModelMaker, but no option for Cocoon Create Tou…