-
Hi,
i'm up to install and configure the adxl345-probing, but surely need a bit of support. First thing happened after injecting the [adxl345-probe] section:
> Klipper meldet: ERROR
> Option 'z_…
-
Is it possible to have a dedicated probing or homing speed parameter available for contact probing?
The `speed` parameter in the `[BDsensor]` section is for QGL or PROBE_ACCURACY only.
So you can le…
-
### Describe the feature or hardware support you'd like
I am using a dockable probe at a fixed z-height. Currently there is no option to for the `_ATTACH_PROBE` and `_DOCK_PROBE` macros to use a sp…
-
Hey guys! I recently bought a 3018 PRO CNC and it came equipped with an MKS-DLC32. I'm trying to get Candle to do the Height Mapping of my PCB using a Z-Probe, but I can't activate it in CANDLE. Is th…
-
### Version
2.1.7
### Hardware / Firmware
GRBL 1.1
### What happened
I'm running a modified Shapeoko 1 with GRBL 1.1h on an Arduino Uno rev 3, and I have a probe which uses the tool-bit itself. T…
-
Is the SO3 tool board compatible with BTT BIQU Microprobe?
I have a 3D Touch (BL Touch knockoff) connect and working. I am trying to replace with the BIQU Microprobe (v2). I added the Klipper code …
-
Most work is already done for this, see:
https://github.com/Duet3D/RepRapFirmware/issues/615
One further job is to set the trigger threshold to be updated by M558.2 and any change to the trigger t…
T3P3 updated
4 months ago
-
I get a G32 leveling failed!
After a G28, G32 does not move X to Z_PROBE_X1. The bed is raised and IR does not hit bed. It's a near collision but you seem to have some failsafe and it stops and th…
-
Hello everyone. which pin is responsible for the Z probe on the MKS-DLC board. I didn't find pin A5
-
Probuję wysłać przesyłkę przez API, metoda dostawy InPost paczkomaty - umowa własna, otrzymuje natomiast błąd
[{\"code\":\"INPOST_TRANSACTION_ERROR\",\"details\":\"internal_server_error\",\"message\…