CNCBASHER ardupilot-mega issues

CNCBASHER / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

RTL does not keep altiture when using airspeed

#185 GoogleCodeExporter closed 9 years ago
3
Cruise airspeed not initialized correctly

#184 GoogleCodeExporter closed 9 years ago
5
FBW_B does not work with airspeed on

#183 GoogleCodeExporter closed 9 years ago
8
Code (beta1.0) does not compile with GPS_PROTOCOL_NONE

#182 GoogleCodeExporter closed 9 years ago
3
Stabilize Mode/Loiter do not work

#181 GoogleCodeExporter closed 9 years ago
10
flight_modes assignments are off by one in setup_flightmodes()

#180 GoogleCodeExporter closed 9 years ago
3
pipe() in wrong file for XPlane interface

#179 GoogleCodeExporter closed 9 years ago
1
Airspeed test not giving proper airspeed 3

#178 GoogleCodeExporter closed 9 years ago
4
no eleveator control in FBW B

#177 GoogleCodeExporter closed 9 years ago
2
LED still flash after GPS lock when using battery power

#176 GoogleCodeExporter closed 9 years ago
5
Got Ready-toFly without GPS lock

#175 GoogleCodeExporter closed 9 years ago
6
Use Bill Premerlani's Wind Estimation code

#174 GoogleCodeExporter closed 9 years ago
4
Bug in todays (10/4/10) version 1160 or so in setup_flightmodes

#173 GoogleCodeExporter closed 9 years ago
3
No throttle control in Stabilize mode

#172 GoogleCodeExporter closed 9 years ago
13
Controls are switched in Stabilize (and FBW) in Elevon mixing mode

#171 GoogleCodeExporter closed 9 years ago
4
test->airspeed doesn't work

#170 GoogleCodeExporter closed 9 years ago
1
Label PID parameters in setup->show

#169 GoogleCodeExporter closed 9 years ago
2
airspeed_ratio not displayed properly

#168 GoogleCodeExporter closed 9 years ago
3
No GPS lock with Ublox?

#167 GoogleCodeExporter closed 9 years ago
3
Erroneous test data from speed sensor during Test

#166 GoogleCodeExporter closed 9 years ago
1
IMU test display error

#165 GoogleCodeExporter closed 9 years ago
2
Only Ch 1-4 are working in the CLI Radio Setup

#164 GoogleCodeExporter closed 9 years ago
1
Use APM Standard Binary Protocol for HIL

#163 GoogleCodeExporter closed 9 years ago
1
Use APM_BinComm for GCS_PROTOCOL_STANDARD

#162 GoogleCodeExporter closed 9 years ago
5
Setup Show data type

#161 GoogleCodeExporter closed 9 years ago
2
setup test waypoint list

#160 GoogleCodeExporter closed 9 years ago
2
FLIGHT_MODE_CHANNEL

#159 GoogleCodeExporter closed 9 years ago
4
Console test xbee should send data over the selected telemetry port

#158 GoogleCodeExporter closed 9 years ago
1
Throttle not responding properly in FBW and above

#157 GoogleCodeExporter closed 9 years ago
0
Integer overflow in GCS_STANDARD yaw

#156 GoogleCodeExporter closed 9 years ago
3
Ability to write waypoint information to EEPROM

#155 GoogleCodeExporter closed 9 years ago
2
Throttle reversing broken in set_servos_4

#154 GoogleCodeExporter closed 9 years ago
5
flight_mode_channel defaults to 5 regardless of #define FLIGHT_MODE_CHANNEL

#153 GoogleCodeExporter closed 9 years ago
1
Flight mode channel

#152 GoogleCodeExporter closed 9 years ago
2
Servo outputs are oscillating

#151 GoogleCodeExporter closed 9 years ago
16
Inconsistent API usage

#150 GoogleCodeExporter closed 9 years ago
4
Separate ground course from yaw sensor in XPlane interface

#149 GoogleCodeExporter opened 9 years ago
0
Separate XPlane sensor and GCS roles

#148 GoogleCodeExporter closed 9 years ago
8
Log_Write_Startup() build error

#147 GoogleCodeExporter closed 9 years ago
1
Non-standard throttle reversing incorrect in Attitude.pde

#146 GoogleCodeExporter closed 9 years ago
1
Log command to dump all logs

#145 GoogleCodeExporter closed 9 years ago
4
mismatch between the APM_Config.h.example and config.h

#144 GoogleCodeExporter closed 9 years ago
2
GCS stream no longer contains roll / pitch data

#143 GoogleCodeExporter closed 9 years ago
7
Ublox GPS library not reporting number of satellites

#142 GoogleCodeExporter closed 9 years ago
8
EEProm map does not match current implementations

#141 GoogleCodeExporter closed 9 years ago
2
CLI - setup - show: All of the gain values and cross track values show up wrong

#140 GoogleCodeExporter closed 9 years ago
5
Clearer menu instructions in setup mode

#139 GoogleCodeExporter closed 9 years ago
6
NMEA Library doesn't work

#138 GoogleCodeExporter closed 9 years ago
4
AP_Math inclusion error

#137 GoogleCodeExporter closed 9 years ago
1
ardupilot mega compilation problem

#136 GoogleCodeExporter closed 9 years ago
3