afarran swm2m_avl_tests issues

afarran / swm2m_avl_tests

Feature tests of AVL agent

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Parameters are not saved according to ParamSaveInterval (PIN 202)

#49 ArturMalyszewicz opened 9 years ago
0
Documentation: in AS027 property ParamSaveInterval has no unit of time

#48 pblo closed 9 years ago
2
For setting AirBlockageTime = 0 terminal does not enter to AirCommBlocked state

#47 ArturMalyszewicz closed 9 years ago
1
Previous lat/lng after sending AVL restart message

#46 pblo closed 9 years ago
4
DriverId Features - deleting more than 100 gives strange error message.

#45 pblo closed 9 years ago
3
SetEventEnable can't enable Sending for LoggedPosition

#44 brabiega closed 9 years ago
1
Errror in run_test function ERROR in teardown handler: "\lunatest.lua:679: bad argument #2 to 'fmt' (string expected, got table)"

#43 ArturMalyszewicz opened 9 years ago
0
TestSensorModule : Property SensorReportingInterval (pin 60) and message Sensor1Change (min 77)

#42 pblo closed 9 years ago
3
Sending fences.dat file to the hardware terminal is unsuccessfull ("invalid path" error message)

#41 ArturMalyszewicz opened 9 years ago
4
Modify way of defining geofences

#40 ArturMalyszewicz closed 9 years ago
1
To mobile SetDigitalOutputs (MIN 2) message generates error for IDP680

#39 ArturMalyszewicz closed 9 years ago
2
Wrong time and GPS information in zoneEntry (MIN 10) message

#38 ArturMalyszewicz opened 9 years ago
1
Geofence service: ZoneEntry and ZoneExit messages are sent immediately no matter what is the value of Interval

#37 ArturMalyszewicz closed 9 years ago
1
Log service: dataLogEntries message contains no entries after applying log filter (by sending setDataLogFilter)

#36 ArturMalyszewicz opened 9 years ago
2
DigitalOutputs: when LPM trigger is set to BuiltInBattery and external power source is present digital output associated with LPM trigger line does not go back to low state

#35 ArturMalyszewicz closed 9 years ago
3
Shell log in Terminal Simulator is not displayed for firmware package IDP-680_800_v4.3.5.8338

#34 ArturMalyszewicz closed 9 years ago
3
PowerMain and PowerBackup messages are not sent for firmware package ver IDP-680_800_v4.3.5.8338

#33 ArturMalyszewicz closed 9 years ago
4
Wrong value of heading in MovingEnd report

#32 ArturMalyszewicz closed 9 years ago
1
In power service (SIN 17) extPowerVoltage (PIN 9) has value greater than 0 for extPowerPresent (PIN 8) set to false

#31 ArturMalyszewicz opened 9 years ago
2
LongDriving (MIN 29): event is generated 30 seconds later than it should according to maxDrivingTime setting

#30 ArturMalyszewicz opened 9 years ago
2
Turn message (MIN 14) contains wrong GPS and time information

#29 ArturMalyszewicz closed 9 years ago
3
Misconfiguration of AVL properties

#28 ArturMalyszewicz opened 9 years ago
2
Digital input line 13 does not control IgnitionOnAndSM0 in correct way

#27 ArturMalyszewicz closed 9 years ago
1
Digital input line 13 does not affect SeatbeltOff state

#26 ArturMalyszewicz closed 9 years ago
3
Digital input line 13 does not control IgnitionOn in correct way

#25 ArturMalyszewicz closed 9 years ago
3
Figure describing switching between Normal and LPM for LpmTrigger=3 is misleading

#24 ArturMalyszewicz opened 9 years ago
1
Reading extPowerPresent (PIN 8) in Power service (SIN 17) by getProperties message fails

#23 ArturMalyszewicz closed 9 years ago
2
setProperties message created with Message Editor causes Gateway Error ID: 116

#22 ArturMalyszewicz closed 9 years ago
3
Continues property in Position service (PIN15 in SIN 20) value is not correctly reverted when terminal leaving Low Power Mode

#21 ArturMalyszewicz closed 9 years ago
3
Geofence Interval property (PIN2 in SIN 21) value is not correctly reverted when terminal leaving Low Power Mode

#20 ArturMalyszewicz closed 9 years ago
1
No explicit information about the values of the fields in AVL report

#19 ArturMalyszewicz opened 9 years ago
1
Digital Output Events: line associated with GeoDwelling activates when entering geozone and does not change it's state when terminal leaves it

#18 ArturMalyszewicz opened 9 years ago
5
Digital Output Events: line assiociated with Idling state is activated by IgnitionOn event

#17 ArturMalyszewicz closed 9 years ago
2
Digital Output Events: no information about the lack of debounce time for events in documentation

#16 ArturMalyszewicz opened 9 years ago
1
Saving LoggedPosition to log deffers sending periodic Position message

#15 ArturMalyszewicz closed 9 years ago
2
TestFramework: setting external power voltage does not work

#14 ArturMalyszewicz closed 9 years ago
4
DigInp1Hi: discrepancy between names of the messages in terminal and documentation

#13 ArturMalyszewicz closed 9 years ago
2
LoggedPosition messages are saved for terminal in stationary state

#12 ArturMalyszewicz opened 9 years ago
4
Position message does not deffer reports generated periodically

#11 ArturMalyszewicz closed 9 years ago
2
LongDriving message: wrong value of totalDrivingTime field in the report (one minute added)

#10 ArturMalyszewicz opened 9 years ago
2
Geofences: wrong value of heading in GeoDwellStart report (361 sent for moving terminal)

#9 ArturMalyszewicz closed 9 years ago
2
Geofences: wrong value of PreviousZoneId in ZoneExit report

#8 ArturMalyszewicz closed 9 years ago
1
Position service - property fixAge not capped when value above 600

#7 ArturMalyszewicz opened 10 years ago
0
IgnitionON (and other I/O related events) are generated immediately after line state is changed

#6 ArturMalyszewicz closed 9 years ago
3
Documentation: "005 AS027 AVL Agent User Guide" wrong description of FuncDigInp1 property

#5 ArturMalyszewicz closed 9 years ago
1
Wrong EventTime reported in IdlingStart message

#4 ArturMalyszewicz closed 10 years ago
2
Speeding: defaultSpeedLimit set to 0 does not disable speeding feature

#3 ArturMalyszewicz closed 9 years ago
2
New gps fix is not requested when MovingStart event occurs

#2 ArturMalyszewicz closed 9 years ago
3
Wrong value of speed and heading in MovingStart report

#1 ArturMalyszewicz closed 9 years ago
2