cprezzi grbl-LPC issues

cprezzi / grbl-LPC

Multiple compiled versions for different boards & machines (under releases)

Other

56 stars 39 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Spindle Enable

#62 schutzero opened 2 years ago
1
MKS Sbase Current control Z axis ,A axis not work

#61 qulet closed 2 years ago
9
The current regulation of the motors is not working

#60 qulet closed 2 years ago
13
No Issue, SKR boards map file for Bigtreetech SKR V1.3 Turbo board

#59 carl1961 closed 3 years ago
1
firmware.bin

#58 Deltaplc closed 3 years ago
4
How to use P2.13 (E1 Port) as 3.3V PWM output

#57 dreiduke closed 3 years ago
1
Is this still valid?

#56 Primer-Merc closed 3 years ago
2
Pwm pin and motor noise

#55 djnatalino closed 3 years ago
1
Smoothieboard 5XC-R

#54 Wolfgang1us closed 3 years ago
11
Fix for issue #49

#53 tscofield closed 3 years ago
0
Dual axis homing

#52 sigxcpu76 opened 3 years ago
3
MKS SGEN (not the L version)

#51 Wolfgang1us closed 3 years ago
2
Clarification on "SKR boards don't work, because pin mapping is messed!"

#50 druzn3k closed 3 years ago
1
Mks sbase z-probe wont invert

#49 swashman closed 3 years ago
8
Running external stepper controllers

#48 webnerdnick closed 3 years ago
1
Question compatible mks board

#47 sinfocomp closed 3 years ago
1
PlatformIO support

#46 MarkXYZ-Mtl closed 4 years ago
1
Support for Panucatt SPI Bigfoot drivers (Azteeg X5 GT)

#45 thouseweart closed 3 years ago
1
Support for SKR 1.3 / 1.4 (turbo)

#44 gamerpaddy closed 4 years ago
1
Compile for different boards

#43 jaysuk closed 4 years ago
4
Fix for safety door, feed hold and cycle start bits

#42 betgear closed 4 years ago
0
Laser PSU wiring

#41 Emiliogallo closed 4 years ago
9
Re-Arm board update?

#40 JeffHank1 closed 4 years ago
2
Safety door detected as opened and door state initiated

#39 betgear closed 4 years ago
17
MKS SGEN Version??

#38 soko79 closed 4 years ago
4
Add open drain configuration per axis

#37 johnsonm closed 4 years ago
0
Compatible with the Bigtreetech SKR V1.3?

#36 eightheads closed 4 years ago
1
CoreXY Version of MKS sbase firmware

#35 ManuelW77 closed 4 years ago
2
SBase is flashed but won't boot correct

#34 ManuelW77 closed 4 years ago
1
Sbase doesnt update GRBL LPC firmware

#33 deadjai closed 4 years ago
8
Z axis not homing with MKS

#32 dansity closed 4 years ago
10
MKS SGEN-L possible?

#31 ej0rge closed 4 years ago
5
Re-ARM + Ramps 1.6 Motors Switched

#30 krizo96 closed 5 years ago
15
Add board type to $I output

#29 tscofield closed 5 years ago
1
Add additional info to help new users

#28 tscofield closed 5 years ago
0
implement changes to allow probing to work

#27 tscofield closed 5 years ago
0
MKS SGEN board

#26 TFMvdBroek closed 5 years ago
4
BIGTREETECH-SKR-V1.3

#25 TFMvdBroek closed 5 years ago
1
[solved] M9 don't stop M8 Pin

#24 gerrylenz closed 4 years ago
4
Can I use tmc2130 or tmc2208?

#23 tewing closed 5 years ago
1
MKS-SBase and PWM questions

#22 FlailAway closed 5 years ago
4
Added comments throughout code

#21 bkp23 closed 5 years ago
0
Booting mks sbase v1.3

#20 nicooler closed 5 years ago
6
Z Probe connection on MKS SBase board

#19 ghost closed 5 years ago
2
Build settings for mks-base

#18 nicooler closed 5 years ago
2
Laser test setup

#17 onezero1010101 closed 5 years ago
1
Creating a new board config questions

#16 mladegaa closed 5 years ago
1
Smoothieboard, GRBL-LPC and LaserWeb

#15 Kgv1 closed 5 years ago
4
Added a description to each option, including the option codes

#14 bkp23 closed 5 years ago
1
Disabled Current Control?

#13 onezero1010101 closed 5 years ago
2