HallonLarm is:
Build and install HallonLarm:
# Install dep and dependencies
go get -u github.com/golang/dep/cmd/dep
dep ensure
# Build for ARMv6, Raspberry Pi 1-2:
env GOOS=linux GOARCH=arm GOARM=6 go build -o hallonlarm_armv6 .
# Build for ARMv7, Raspberry Pi 3+:
env GOOS=linux GOARCH=arm GOARM=7 go build -o hallonlarm_armv7 .
# Copy the binary to /usr/local/bin
sudo cp hallonlarm_armv[67] /usr/local/bin/hallonlarm
# Install the unit file
sudo cp hallonlarm.service /etc/systemd/system/
# Edit the unit file to change mqtt address
sudo vim /etc/systemd/hallonlarm.service
# Reload systemd
sudo systemctl daemon-reload
# Copy and edit the sample configuration
sudo cp example.conf /etc/hallonlarm.conf
sudo vim /etc/hallonlarm.conf
# Start the service
sudo systemctl start hallonlarm.service
# Enable at boot
sudo systemctl enable hallonlarm.service
The default configuration path is /etc/hallonlarm.conf
.
This can be changed by adding the argument -hl.config path/to/hallonlarm.conf
to the start command
A minimal configuration looks like this (the configuration language is HCL:
device "sensor/contact/bedroom_window" {
name = "Bedroom Window"
type = "contactSensor"
feature "contactSensorState" {
gpioIn = {
pin = 24
}
}
}
For a complete example with more options, see example.conf