krysiu brewtrolleralpha issues

krysiu / brewtrolleralpha

Automatically exported from code.google.com/p/brewtrolleralpha

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Add RIMS flow switch trigger code and setup option in UI

#73 GoogleCodeExporter opened 9 years ago
0
Temp displaying incorrectly

#72 GoogleCodeExporter opened 9 years ago
0
Typeo in StepLogic file PROMreadBytes instead of EEPROMreadBytes

#71 GoogleCodeExporter opened 9 years ago
1
Embedded i2c BTnic Step commands cause crash

#70 GoogleCodeExporter opened 9 years ago
0
Proper Support for Dedicated HEX

#69 GoogleCodeExporter opened 9 years ago
1
Add Mash Recirc Valve Profile

#68 GoogleCodeExporter opened 9 years ago
0
Make the MT thermal mass configurable by the end user (Heat Strike in MT, or single vessel system)

#67 GoogleCodeExporter opened 9 years ago
0
Make the grain absorbsion rate configurable by the end user

#66 GoogleCodeExporter opened 9 years ago
1
Add a Recirc function to the Chill screen

#65 GoogleCodeExporter opened 9 years ago
0
Predictive SMART_HERMS_HLT

#64 GoogleCodeExporter opened 9 years ago
0
Option Display Screen

#63 GoogleCodeExporter opened 9 years ago
3
Setpoints in tenths

#62 GoogleCodeExporter closed 9 years ago
2
Delay Heat for RIMS users

#61 GoogleCodeExporter closed 9 years ago
1
Delay pump in valve profile

#60 GoogleCodeExporter closed 9 years ago
1
Provide the ability for the user to use the opto-isolated inputs in their brewday

#59 GoogleCodeExporter opened 9 years ago
3
Valve sequencing / timing / delays

#58 GoogleCodeExporter opened 9 years ago
1
EEPROM get/set Program name bug

#57 GoogleCodeExporter closed 9 years ago
1
AUTO_FILL_EXIT Bug with Dough-In Mash Step

#56 GoogleCodeExporter closed 9 years ago
1
Add I2CLCD Menu options in Setup

#55 GoogleCodeExporter closed 9 years ago
2
Circuit Sharing Logic

#54 GoogleCodeExporter opened 9 years ago
2
FT: Valve Profiles, etc

#53 GoogleCodeExporter opened 9 years ago
2
FermTroller: Screen/Menu/Encoder library implementation

#52 GoogleCodeExporter opened 9 years ago
1
Compile / Setup Options

#51 GoogleCodeExporter opened 9 years ago
2
Develop Screen Library

#50 GoogleCodeExporter opened 9 years ago
2
HLT Idle/Boil Heat/Boil Idle Valve Profiles

#49 GoogleCodeExporter closed 9 years ago
2
HLT Setpoint During Sparge

#48 GoogleCodeExporter closed 9 years ago
3
Add MASH_AS_KETTLE Option

#47 GoogleCodeExporter opened 9 years ago
2
Terminology enhancement:EXIT in all menu instead of CANCEL

#46 GoogleCodeExporter closed 9 years ago
0
Ability to load saved data file from BTLog

#45 GoogleCodeExporter opened 9 years ago
1
Timer: Refresh does not erase all characters when alarm is stopped.

#44 GoogleCodeExporter closed 9 years ago
1
Need better documentation and experience for setting up volume calibrations

#43 GoogleCodeExporter opened 9 years ago
1
Compile failed when #define BTPD_SUPPORT is activated.

#42 GoogleCodeExporter closed 9 years ago
2
When in a Set Timer menu: The running timer is lost when Cancel is triggered.

#41 GoogleCodeExporter closed 9 years ago
2
HLT as Kettle Not working in v2.1

#40 GoogleCodeExporter closed 9 years ago
1
Migrate to Arduino-0019 and Sanguino-0018

#39 GoogleCodeExporter closed 9 years ago
0
Add "Minimum HLT Volume" for HERMS users

#38 GoogleCodeExporter opened 9 years ago
3
Add Mush Tun Loss to Strike Water Calculation

#37 GoogleCodeExporter closed 9 years ago
1
Refill screen showing after grain in - even when no additional water is necessary

#36 GoogleCodeExporter closed 9 years ago
2
Show Volume Calibration values in real time

#35 GoogleCodeExporter closed 9 years ago
1
Temperature reading from the "Assign Temp Sensor" screen.

#34 GoogleCodeExporter closed 9 years ago
0
Preserve Scroll & Cursor Location during Toggle Value

#33 GoogleCodeExporter closed 9 years ago
6
Force justification on the Boil Additions screen

#32 GoogleCodeExporter closed 9 years ago
0
GET_PROG / SET_PROG does not retrieve or save the "Mash Liquor Heat Source" value for the program

#31 GoogleCodeExporter closed 9 years ago
3
Allow buzzer sound modulation

#30 GoogleCodeExporter closed 9 years ago
0
setProgRatio / setProgPitch / setProgAdds wierdness

#29 GoogleCodeExporter closed 9 years ago
1
Change Timer Format

#28 GoogleCodeExporter closed 9 years ago
2
Serial Enhancements for Backup / Restore

#27 GoogleCodeExporter closed 9 years ago
1
Change Compile Options to use Parasite Power on temp Sensros by Default

#26 GoogleCodeExporter closed 9 years ago
2
Program Enhancements

#25 GoogleCodeExporter opened 9 years ago
3
Consider methods to backup EEPROM data

#24 GoogleCodeExporter closed 9 years ago
6