p3p pio-framework-arduino-lpc176x issues

p3p / pio-framework-arduino-lpc176x

10 stars 20 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Allow configuring cpu frequency through board_build.f_cpu

#54 mh-dm opened 1 month ago
0
Fix compiling with -flto by adding some missing volatile qualifiers

#53 mh-dm closed 1 month ago
0
Remove unused libusbd_175x_6x_lib.a

#52 mh-dm closed 1 month ago
0
Rename Sense_ASC::NONE to Sense_ASC::DISABLED to fix ODR warning

#51 mh-dm closed 1 month ago
4
Reduce SoftwareSerial priority and allow configuration through LPC_SERIAL_IRQ_PRIORITY

#50 mh-dm closed 1 month ago
4
SysTick_Handler very likely to cause significant jitter in timing critical code

#49 mh-dm opened 1 month ago
5
error: 'TRANSFER_BLOCK_Type' has not been declared

#48 dzervas closed 1 month ago
1
Fix no response on Serial* with high BAUDRATE

#47 mh-dm closed 3 years ago
6
Modifying LER with or'd bit_value or bitset_value worked

#46 descipher closed 3 years ago
4
Allow DiskIO functions to be overwritten by the client code

#45 rhapsodyv closed 3 years ago
0
Update package.json

#44 ivankravets closed 3 years ago
0
Support DMA 16 bit for Memory to peripheral

#43 rhapsodyv closed 3 years ago
0
PlatformIO Core 4.4 and the package registry

#42 ivankravets closed 3 years ago
10
UARTs: select pins choosen by manufacturer

#41 ruedli closed 3 years ago
10
Fix for I2C

#40 Serhiy-K closed 3 years ago
3
Fixed Latching for HardwarePWM

#39 mlehnhoff closed 3 years ago
4
HW PWM is not latched correctly when the value is changed

#38 mlehnhoff closed 3 years ago
3
Change the pin function id for uart3

#37 0r31 closed 4 years ago
0
Add a flag to force software pwm even if the related pin is pwm capable

#36 0r31 closed 3 years ago
1
Force soft pwm

#35 0r31 closed 4 years ago
1
Remove eeprom function stubs

#34 p3p closed 4 years ago
0
Fix UART3 on lpc176x, ie: BTT SKR 1.4, BTT SKR 1.4 TURBO

#33 Minims closed 3 years ago
5
LPC 1778 / 4078 208 pin package support

#32 InsanityAutomation closed 1 month ago
3
LPC1768 h/w pwm servo conundrum

#31 Andrei-Pozolotin closed 3 years ago
1
Set the I2C master address to 1 if not already defined.

#30 0r31 closed 4 years ago
0
Missing byte manipulation macros.

#29 0r31 closed 4 years ago
0
Unable to install this library

#28 wuaikali closed 4 years ago
0
Ability to use alternative UART ports

#27 msutas closed 4 years ago
2
Multiple definition of eeprom functions when compiling Marlin 2 with framework-arduino-lpc176x@0.2.1

#26 atoomnetmarc closed 4 years ago
2
namespace update

#25 p3p closed 4 years ago
0
add ramcode code section and move isr vectors to ram

#24 p3p closed 4 years ago
0
GPIO and ADC improvements

#23 p3p closed 4 years ago
0
Improve USB CDC performance

#22 p3p closed 4 years ago
0
Ability to use full-resolution 12-bit ADC values

#21 LinFor closed 4 years ago
4
TMC CONNECTION ERROR with TMC2660 and LPC1769

#20 andyman198 closed 5 years ago
2
Use the LPC176x hardware serial number for the usb device

#19 p3p closed 5 years ago
0
Clean up const functions

#18 p3p closed 5 years ago
0
Clean up compile warnings

#17 p3p closed 5 years ago
0
Enable Hardware PWM, Frequency modification

#16 p3p closed 5 years ago
0
New SoftwareSerial Implementation

#15 p3p closed 5 years ago
0
Use DMA for USB disk and serial operations

#14 gloomyandy closed 5 years ago
0
Software Serial RX pin interrupt is not necessary

#13 Msq001 closed 5 years ago
0
delete unused variable

#12 Ludy87 closed 5 years ago
1
Release 0.0.6

#11 p3p closed 5 years ago
0
Adding Boolean to types for compatibility

#10 andyman198 closed 5 years ago
0
Feature Request: would it be possible to implement micros()?

#9 andyman198 closed 5 years ago
2
Release 0.0.5

#8 p3p closed 5 years ago
0
Update 0.0.4

#7 p3p closed 5 years ago
0
Fix overlapping tone calls

#6 p3p closed 5 years ago
0
Release 0.0.3

#5 p3p closed 5 years ago
0