-
```
Recent changes to the accelerometer drivers (assumed) has affected the
gameplay, to fix
echo 10 > /sys/devices/platform/lis302dl.1/threshold
echo 10 > /sys/devices/platform/lis302dl.2/threshol…
-
```
After flashing the current firmware I'm not able to configure the Accelerometer
in Missionplaner.
Missionplaner is running through the setup so fast, I can't lay the Quad on it
sides.
Maybe it'…
-
```
Sagar, can we make another accelerometer PCB. I would like to be involved.
We need a few more for redundancy, at DDS. We can get extra Arduino boards
from Keyur if this fails. But We will need m…
-
I think it would be an idea to do a feasibility study and try and answer the following;
1) Can we fit all the required components on to a PCB no wider than around 7-8mm?
2) Would such a board be pract…
-
I am working on improving the library.
I have already implemented methods to set offsets (which allow to compensate the raw data directly on the chip) and now working on the Notch and AAF filters, p…
-
### Random useful keywords:
quaternions
Kalman Filter
ZUPT or ZARU scheme
hard-iron/soft-iron bias
### Links:
https://www.vectornav.com/resources/inertial-navigation-primer/specifications--and--…
-
Add support for Youtube embedding options as switch boxes below the YouTube Video ID form field.
- [ ] Loop
- [ ] Autostart
- [ ] Mute
- [ ] Modest branding
- [ ] Hide controls
- [ ] Hide tit…
-
Korokoro Kirby (Japan)
Kirby - Tilt 'n' Tumble (USA)
RetroArch - Settings - Input - Auxiliary Sensor Input
-
Need somehow to be able to find the angle of the accelerometer when taking data, do we do it whilst taking data or after in MATLAB (take the average angle over the whole dataset and remove from the an…
-
I'm trying to upgrade to Pi OS "bookworm" but the Monarco hat seems to have gone AWOL; both the 1-wire interface and the RTC are missing from `i2cdetect -y 1`:
```
0 1 2 3 4 5 6 7 8 …