issues
search
robot-army
/
hotstick
An open-source hardware soldering station
Other
3
stars
3
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Pencil should weigh 75g or less
#46
jeremypoulter
opened
8 years ago
0
Files needed for production
#45
jeremypoulter
closed
8 years ago
0
Final (hopefully) changes for rev 1 production version
#44
jeremypoulter
closed
8 years ago
0
Yet more tweaks to tip power
#43
jeremypoulter
closed
8 years ago
0
Small tweak to increase the width of the tip power rail
#42
jeremypoulter
closed
8 years ago
0
First revision of the PCB layout
#41
jeremypoulter
closed
8 years ago
0
Updates to match prototype
#40
jeremypoulter
closed
8 years ago
0
Change to use Cold-Junction Compensated Thermocouple-to-Digital Converter
#39
jeremypoulter
closed
8 years ago
1
Initial schematic for handle PCB for accelerometer feasibility study
#38
jeremypoulter
closed
8 years ago
0
Indicator LED in handle
#37
jeremypoulter
opened
8 years ago
1
Gesture control
#36
jeremypoulter
opened
8 years ago
1
Free (as in beer) toolchain
#35
jeremypoulter
opened
8 years ago
0
Accelerometer feasibility study
#34
jeremypoulter
opened
8 years ago
1
Safety - no output unless the controller is sane
#33
dhprice
opened
8 years ago
0
Finish requirements
#32
robot-army
opened
8 years ago
1
Use a filesystem on the SD card
#31
robot-army
opened
8 years ago
2
Duplicate as near as dammit the weller handset and cable in terms of dimensions, weight, flexibility of cable.
#30
robot-army
closed
8 years ago
0
Design in a way that the output stage and temperature sense can be easily replaced to drive other handles/irons
#29
robot-army
closed
8 years ago
0
Requirements Review 1
#28
robot-army
closed
8 years ago
1
Provide an SD card slot
#27
Gavatastic
closed
8 years ago
22
Ergonomics requirements
#26
dhprice
closed
8 years ago
8
Decide on Documentation licence
#25
dhprice
opened
8 years ago
4
Display current temperature
#24
dhprice
closed
8 years ago
1
What power tip?
#23
dhprice
closed
8 years ago
2
Identify target tips
#22
dhprice
closed
8 years ago
1
Provide a GPIO header on the board
#21
jeremypoulter
closed
8 years ago
7
ambient light detection for shutdown
#20
dhprice
closed
8 years ago
4
Define the target users
#19
dhprice
opened
8 years ago
2
Design for compliance
#18
robot-army
opened
8 years ago
10
Single or dual station?
#17
robot-army
closed
8 years ago
4
BOM Cost should not exceed £80 excluding tip
#16
robot-army
closed
8 years ago
9
Display fancy graphics in colour
#15
robot-army
closed
8 years ago
5
Iron detection doesn't rely on special holder
#14
robot-army
closed
8 years ago
0
Detect iron not in use for shutdown
#13
robot-army
closed
8 years ago
1
Research other similar projects
#12
robot-army
opened
8 years ago
5
Power itself off battery for a number of joints
#11
robot-army
closed
8 years ago
2
Measure, record and display power output of iron (wibni)
#10
robot-army
closed
8 years ago
1
System power input DC, 12-24 V with as common a connector as we can manage.
#9
robot-army
closed
8 years ago
2
Allow adjustment of temperature setpoint by rotary encoder with detents
#8
robot-army
closed
8 years ago
2
Display temperature setpoint in degrees C
#7
robot-army
closed
8 years ago
0
Drive a single Weller eg. RT1 tip
#6
robot-army
closed
8 years ago
6
Decide on a license for branding
#5
robot-army
opened
8 years ago
2
Decide on a software license
#4
robot-army
opened
8 years ago
3
waffle.io Badge
#3
waffle-iron
closed
8 years ago
0
Develop requirements
#2
robot-army
closed
8 years ago
3
Decide on a hardware license
#1
robot-army
closed
8 years ago
3