pulquero BatteryAggregator issues

pulquero / BatteryAggregator

MIT License

32 stars 7 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Time To Go

#69 wetty opened 4 days ago
1
crash

#68 endurance1968 closed 5 days ago
0
Agregator logs zero until first battery comes online.

#67 rldoose closed 2 weeks ago
2
custom charge curve

#66 adcrafter27 opened 3 weeks ago
2
Charge Current Limit to high

#65 wetty closed 1 week ago
18
Regular but unreproducable crash

#64 endurance1968 closed 2 weeks ago
3
unsupported operand type(s) for -: 'float' and 'NoneType'

#63 erhankeseli closed 2 months ago
1
Troubleshooting support: Logfiles to analyze crash

#62 endurance1968 closed 2 months ago
2
Feature: Config Checker and Config Generator

#61 KaiGrassnick closed 2 months ago
2
Question/Improvement: Battery Temperature

#60 endurance1968 closed 2 months ago
1
Compatible with python new version?

#59 Rubens974 opened 2 months ago
3
DVCC Support not available anymore in 3.0.66

#58 dersch81 closed 3 months ago
1
Feature Request - config check

#57 endurance1968 closed 2 months ago
3
select the highest CVL in Multible Batterie Systems

#56 rolandlueders closed 3 months ago
4
exclude service

#55 rolandlueders closed 3 months ago
2
Enhanced Load Balancing and Aggregation Strategy for Uneven Battery Charging Rates

#54 ogurevich closed 3 months ago
2
Automatic download triggered crash and forced recharge

#53 endurance1968 closed 2 months ago
13
CCL and DCL to high

#52 locke987 closed 3 months ago
2
CCL to low?

#51 endurance1968 closed 3 months ago
2
Since v3.0.60 Again CCL = 0 and DCL =0 #40

#50 Rubens974 closed 3 months ago
3
all packs in Float at 54V, only BatteryAggregator is at 55.2V and dont reduce the CVL

#49 superkrischi closed 4 months ago
4
load to SOC reset

#48 rolandlueders closed 3 months ago
8
CCL and DCL in new Capacity and Count modes does not take in to account "Allow to charge" and "Allow to discharge"

#47 AlexdeKairos closed 3 months ago
19
Batt Charge Current is lower than CCL

#46 locke987 closed 3 months ago
9
CVL is not aggregated when using CVL_ICONTROLLER_MODE = True

#45 Albarge closed 4 months ago
14
Charging voltage change from absorption voltage to rest voltage

#44 RRonGit closed 4 months ago
8
Setting battery capacity issue

#43 campervantime closed 5 months ago
7
Cerbo GX changed DeviceID every reboot/update

#42 Scheppo closed 4 months ago
1
Feature request. Provide Battery information to victron CAN bus for other devices

#41 AlexdeKairos opened 5 months ago
3
CCL = 0 and DCL =0

#40 Rubens974 closed 5 months ago
20
low battery

#39 ondrom111 closed 4 months ago
4
Lost batteries and shutdown

#38 Albarge closed 4 months ago
5
CVL drops and spikes, CCL and DCL swings

#37 leiweke closed 4 months ago
23
After limitation or CCL or DCL (new feature), CVL goes also to 0V. after resuming normal condition, CVL remains 0V

#36 AlexdeKairos closed 5 months ago
3
Since 3.0.18: ZeroDivisionError: float division by zero

#35 DenkBrettl closed 5 months ago
5
One battery goes to protection, closing charge and agregator sets CCL to 0a on all batteries.

#34 AlexdeKairos closed 5 months ago
8
How to exclude shunt from aggregation, but use the SOC of the shunt

#33 seamaster101 closed 5 months ago
12
Current vs. Voltage decimal points display

#32 seamaster101 closed 5 months ago
2
BatteryAggregator not running with Venus version 3.30

#31 Dropdragger closed 5 months ago
2
sudden change in CCL / DCL when loading

#30 Micha854 closed 5 months ago
5
wrong value for InstalledCapacity

#29 stixif closed 6 months ago
7
Crash every couple of seconds with the current version (3.0.11)

#28 thkusch closed 6 months ago
2
v3 error no Battery

#27 stixif closed 6 months ago
8
Wrong voltage reading

#26 11011010 closed 6 months ago
6
CCL & DCL are not aggregated

#25 johnboyi closed 6 months ago
6
Battery aggregator gets stuck when SOC near 100%

#24 dbachats closed 6 months ago
17
How to change CVL?

#23 dersch81 closed 3 months ago
20
Start battery aggregator after init of battery

#22 dersch81 closed 6 months ago
11
Restart BatteryAggregator

#21 Dropdragger closed 6 months ago
6
[Question] SOC to calculate CVL and DCL from the shunt

#20 entropia1ac closed 6 months ago
9