Unipi Control use Modbus for fast access to the I/O and provide MQTT topics for reading and writing the circuits. Optionally you can enable the Home Assistant MQTT discovery for binary sensors, sensors, switches and covers.
For more information please read the documentation at: docs.superbox.one
We have a ready to use SD card image called Unipi Control OS.
Requirements:
Create a virtual environment:
python3 -m venv PATH_TO_VENV
Activate the virtual environment:
source PATH_TO_VENV/bin/activate
Install unipi-control
with pip:
pip install unipi-control
Copy the config files to /etc/unipi
and configurate the /etc/unipi/control.yaml
.
Create the systemd service /etc/systemd/system/unipi-control.service
with following content:
[Unit]
Description=Unipi Control
After=multi-user.target
[Service]
Type=simple
ExecStart=PATH_TO_VENV/bin/unipi-control --log systemd
Environment=PYTHONUNBUFFERED=1
[Install]
WantedBy=multi-user.target
Enable and start the systemd service:
systemctl --system daemon-reload
systemctl enable unipi-control.service
systemctl start unipi-control.service
The changelog lives in the CHANGELOG.md document. The format is based on Keep a Changelog.
We're happy about your contributions to the project!
You can get started by reading the CONTRIBUTING.md.
We put a lot of time into this project. If you like it, you can support us with a donation.
We have a Home Assistant blueprint automation to control covers with binary sensors. Take a look in the extras directory.
This is a third-party software for Unipi Neuron. This software is NOT from Unipi Technology s.r.o..