timvideos HDMI2USB-jahanzeb-firmware issues

timvideos / HDMI2USB-jahanzeb-firmware

Original hand-coded firmware for the HDMI2USB - HDMI/DVI Capture - project

https://hdmi2usb.tv

Other

105 stars 26 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

docs: fxload is missing

#132 micolous closed 8 years ago
1
docs: makestuff.eu has been taken over by a squatter

#131 micolous closed 8 years ago
1
Support the Numato Opsis board

#130 mithro closed 9 years ago
5
Added heart_beat.vhd file in hdmi2usb.xise project file.

#129 rohitk-singh closed 9 years ago
2
Fix the pattern generation to support both 720p and 1024x768 resolution generation

#128 mithro closed 8 years ago
3
Adding tool for pretty formatting the code.

#127 mithro closed 8 years ago
2
Adding better documentation to the EDID hack module.

#126 mithro closed 9 years ago
1
Fix forcing HDMI port 1 to 1024x768 mode.

#125 mithro closed 9 years ago
1
Make 720p the default

#124 CarlFK closed 8 years ago
2
Renaming external signals to be consistent

#123 mithro closed 9 years ago
3
Signal names (specially at the top level) leave lots to be desired.

#122 mithro closed 8 years ago
1
keep streaming something when hdmi input drops

#121 CarlFK closed 8 years ago
1
UVC non compliance - GET_DEF(PROBE) not supported

#120 CarlFK closed 8 years ago
2
Don't fail if nothing to clean up.

#119 mithro closed 9 years ago
1
Fixing a small issue in the travis script.

#118 mithro closed 9 years ago
1
Output name of cypress firmware should be hdmi2usb.hex

#117 mithro closed 9 years ago
1
Polish Cypress FX2 firmware

#116 shenki closed 9 years ago
2
Small fixes to the travis build.

#115 mithro closed 9 years ago
1
Holding down the change input source buttons freezes video output

#114 mithro closed 8 years ago
5
Switching input sources causes sync issues

#113 mithro closed 8 years ago
4
You need to reset the device after loading firmware before uvc works

#112 mithro closed 8 years ago
2
Merge rohit's changes for correct usbid changes from old libfpgalink

#111 mithro closed 9 years ago
2
cypress firmware makefile should put build artificat in an ./cypress/output directory

#110 mithro closed 9 years ago
2
tools/flash.sh fails because missing cypress firmware

#109 mithro closed 8 years ago
2
submodule in the fx2lib for the cypress firmware

#108 mithro closed 9 years ago
2
Fixed README.md in cypress/ directory

#107 mithro closed 9 years ago
2
Makefile doesn't do anything after failure;

#106 mithro closed 9 years ago
2
Debug unreliable screen detection and possible EDID issue

#105 mithro closed 8 years ago
20
Fixing the flash.sh script for makestuff location.

#104 mithro closed 9 years ago
1
HDMI2USB switching should be seemless

#103 mithro closed 8 years ago
3
Map 720p and 1024x768 to a hardware switch

#102 mithro closed 8 years ago
2
Open source Cypress FX2 Firmware

#101 shenki closed 9 years ago
2
Output frame counter corrected

#100 ajitmathew closed 9 years ago
1
Control port via usb-uart

#99 ajitmathew closed 9 years ago
1
Port misoc / migen to Digilent Atlys board

#98 mithro closed 9 years ago
2
Create a HDMI2USB website

#97 mithro closed 9 years ago
2
Create an FOSS DisplayPort core

#96 mithro closed 9 years ago
3
Add PTZ support to uvc device

#95 shenki closed 8 years ago
1
DCT1 register initial vs. register reset values

#94 shenki closed 10 years ago
1
tools: added cloud.py, which starts an EC2 instance with the Xilinx tools available.

#93 miselin closed 10 years ago
1
DCT1 register initial vs. register reset values.

#92 cfelton closed 10 years ago
9
Allow custom path to Xilinx distribution in flash script, and default the Atlys development board USB IDs for flashing.

#91 miselin closed 10 years ago
3
Suppress severe warnings

#90 shenki closed 10 years ago
6
Warning in edid_master_slave_hack

#89 shenki closed 8 years ago
2
Warnings in serdes_1_to_5_diff_data

#88 shenki closed 8 years ago
8
Adding travis environment to be sent over SSH.

#87 mithro closed 10 years ago
2
Make it harder to accidently overwrite your travis ssh key.

#86 mithro closed 10 years ago
1
Adding travis notification messages.

#85 mithro closed 10 years ago
1
Refactoring the travis scripts to allow easier extension.

#84 mithro closed 10 years ago
1
Port daisho USB3.0 core to Xilinx parts

#83 mithro closed 8 years ago
1