tjhowse sand_drawing issues - Githubissues

tjhowse / sand_drawing

Code, PCBs and CAD for a SCARA-based sand drawing robot

https://wiki.tjhowse.com/doku.php?id=projects:sand_drawing:overview

Other

17 stars 6 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

I want to create this with only 3D printing since i dont have Wood cutting stuff...

#17 Maki9009 opened 7 months ago
0
No snazzy gif at the top of the readme.

#16 tjhowse opened 4 years ago
0
No drawings for shaft cross-drill dimensions.

#15 tjhowse opened 4 years ago
0
Pattern shuffling can interrupt patterns

#14 tjhowse opened 4 years ago
0
No software installation/customisation guide.

#13 tjhowse opened 4 years ago
0
Store generators to flash and add the ability to rotate through them

#12 tjhowse closed 4 years ago
0
No relative motion mode

#11 tjhowse closed 4 years ago
1
Ball makes a crunching sound as it moves through the sand

#10 tjhowse opened 4 years ago
1
Need an ESP32 circuit and PCB

#9 tjhowse closed 4 years ago
0
GCODE format poorly documented

#8 tjhowse closed 4 years ago
1
Support polar coordinates

#7 tjhowse opened 4 years ago
0
Steppers make an audible noise when moving

#6 tjhowse opened 4 years ago
2
Arm 2 enclosure collision possible when homing

#5 tjhowse opened 4 years ago
0
G1/G0 gcode speed field is ignored

#4 tjhowse opened 4 years ago
0
SCAD assembled module should use split arm1 variant.

#3 tjhowse closed 4 years ago
1
Arm1 can flex due to belt tension

#2 tjhowse closed 4 years ago
1
Arm1/shaft1 pin cannot be driven out

#1 tjhowse closed 4 years ago
1