-
I'm no coder but I see your code uses "gnss.h". Does this mean that you can utilize a connected GNSS receiver as well? I don't see GPS support in the documentation anywhere. Can you elaborate on this …
-
Some time ago I disabled GLONASS and activated beidou, now I want to activate GLONASS and turn off beidou. I was able to do it with the CLI command conf gnss, command was executed without issues, but …
-
Hello
Thank you for your good software.
I wanted to ask a question, what data did you use (https://terras.gsi.go.jp/)? I downloaded the coordinates_R3 data, but the list of coordinates is in the ITR…
-
Hello, thank you for your good program
I wanted to ask, how did you visualize the gnss data in line with los?
My Insar displacement data is correct.
But when I visualize the gnss data, it is not th…
-
-
Spotted in https://github.com/RAKWireless/RUI3-Best-Practice/blob/6b84538972cbafc1f40fa21ea5b69373755957a3/RUI3-GNSS/gnss.cpp#L105
The comments state that this is the old way of saving config, bu…
-
Based on https://forum.rakwireless.com/t/gps-accuracy-on-rak12500/12660/13
BeeGee's code is using `setMeasurementRate()`. I've also seen this elsewhere and i'm wondering what this exactly does. Esp…
-
I downloaded the Gnss displacement data from the Nevada Gnss all station site and ran Licsbas for the frame mentioned in the article. The output of the displacements of Insar is the same as the licsb…
-
### Feature description
The current GNSS Geopackage Log contains a set of columns but the fix type (Single, DGPS, Float, Fix) is missing. (NMEA GGA GPS Quality indicator)
This information is very …
-
E (7021) w5500.mac: emac_w5500_init(823): reset w5500 failed
E (7021) esp_eth: esp_eth_driver_install(228): init mac failed
[ 7027][E][ETH.cpp:659] beginSPI(): SPI Ethernet driver…