-
I've ported my air-quality code from Clue to FunHouse, and in the process looked at what the on-board AHT humidity sensor says compared to what the SCD30 says.
- The AHT onboard says 18.2%RH at 40C…
-
Is there a place that lists all available sensors or a guide on how to add new sensors?
I'm willing to commit changes for new sensors if I need them, but I'm unsure of how this is tracked currently.
-
Podczas stanu uśpienia nie wyłącza się wiatrak SPS30 Sensirion. Podobnie jest między pomiarami. Niepotrzebnie się kręci, wzrasta zużycie energii. Bardzo dokładnie wyjaśnia obsługę LOW POWER nota produ…
-
-
When following the directions here, https://github.com/AnaviTechnology/anavi-docs/blob/master/anavi-gardening-uhat/anavi-gardening-uhat.md#examples, apt spits out the following.
```
sudo apt insta…
-
I think the minimum necessary for releasing to crates.io is probably to fix the temp type (#2) and add humidity measurement. I've got working code for that which returns an i32 for the RH value in th…
-
The Module I2C module have a bug:
i2c.write is ok (PCF8574)
c=i2c.read(id,1) the mcu restart i have tried with SHT21, BMP180, TSL2561 , PCF8574 all FAIL
Please can you repair this? And have your exam…
-
Hi there,
Thank you for your work and effort you put into this projects. It's just awesome. I am running it with a SDS011, a BMP280 and a HTU21D. It's running stable since a looong time.
Now I ran…
-
I'd love to use this parameter rather than pulling and normalizing/interpolating data on my end, but documentation does not make the usage clear.
-
I'm trying to use Roode in my ESP32 and it works very good, but I also need to add an BH1750 Illuminance sensor which need i2c bus too, when I'm trying to define the i2c bus for both Roode and BH1750 …