-
On running the command `make posix_sitl_default gazebo_tailsitter` (as detailed at the bottom of https://dev.px4.io/simulation-gazebo.html) on the master branch, I get the following error:
````
comm…
-
I made a long flight, all is right except for the altitude hold, the copter seems "floating" in height,(almost no wind), and I checked the log, and found that the LPSP.VZ is not contine from time to t…
-
We are working on visual hovering indoor using 6 optitrack cameras. However, it does not work with the following configuration.
----
### Issue details
I can see the data stream in the mocap n…
SandW updated
7 years ago
-
-
hi,everybody,i just simulate the in the ros and gazebo,use the command
make posix_sitl_default gazebo
then i use the QGC to make the MAV arm and takeoff, but after send the takeoff command the MAV t…
-
Hi there,
I'm trying to control a quad in a Vicon environment. I have an Odroid XU4 connected to a pixhawk via FTDI cable through telem2 and USB.
I'm using firmware: px4fmu-v2_lpe.px4
The is…
-
SITL optical-flow only configs seems to exhibit a slow drift over time, which wasn't this bad before. ~This seems to be the culprit : https://github.com/PX4/Firmware/pull/6527~
It seems to be the swi…
-
I'm trying to run a simulation with multiple quadrotors in Gazebo with ROS. I think I can just spawn multiple gazebo models and corresponding px4 nodes in separate namespaces, however they will all pu…
-
I am using Pixhawk 2 with px4fmu-v2_lpe firmware. I am trying to integrate px4flow with it. When I give the takeoff command from qgroundcontrol (OFFBOARD flight mode), the drone flies away and crashes…
-
hello I have a mediacom '11 I tried your iso, but it gives me an error:
error: invalid magic number
then it returns a strange code in any case it does not work the boot
do you have any idea …