-
The european Galileo HAS (High-Accuracy-Service) is providing a SSL/TLS enabled NTRIP caster on port 443, therefore I would like to have SSL/TLS support added to RTKLIB. I would be willing to develop …
-
Hello.
I am working (experimenting) on transmitting the RTCM messages with MQTT frames via Mosquito Brocker and TLS connection.
I have seen this idea on:
https://github.com/GeoscienceAustralia/…
hagre updated
3 years ago
-
Facet hung issuing corrections to Rtk2go and Emlid simultaneously
facet v4.1 06/14/24
I was working today with Facet in base mode for a little over 5 hours, issuing corrections to Rtk2go and Emlid…
-
Dear all,
I try to use a NEO-M8T module with an Ntrip base server but i can't get the FIX solution in the rtknavi. I get the SINGLE solution only.
I connect the device via USB port and I use a high p…
-
Currently I'm using zed-f9p with ublox and ntrip.
below is yaml file.
```
debug: 1
save:
mask: 3103 # Save I/O, Message, INF Message, Nav, Receiver
…
-
I am trying to find information on wifi drivers for Linux that scan for surrounding WiFi networks in chunks thus allowing to handle pending traffic.
I have found this mentioned vaguely in https://b…
-
I wonder if your u-blox can connect with qianxun amount. If so, may I ask about the product type of you use u-blox GNSS module?
-
Hello,
We are using AsteRx SBi3 Pro+ for a self-driving project. We are using ROS Noetic (ROS 1) on Ubuntu 20.04. **We connected the AsteRx SBi3 Pro+ through the USB cable and the computer had Inte…
-
- Realsense D435のUSB3.0の電気信号ノイズの影響を遮断する
- 高度(Z)方向情報もKalman Filterに入れるか
- u-centerとNTRIPなしで、Linuxから直接Base StationのRTCM情報を取得して、ROSトピックとしてbroadcast (publish)するようにする
- configurate Rover GPS from ublox …
-
Dear Tim et al.,
Today we came to a estrange situation were if RTKNAVI Windows GUI, versions demo5 b34h as well as Tomoji Takasu 2.4.3 b34, are provided with a Septentrio Mosaic X5 RTCMv3 TCP strea…