-
Hi. Is Y505-A sensor supported? I see it in the yosemitechModel but it is commented and i appears not to be working on Y504 config. Thanks for any help.
-
The PCB needs multiple changes for V2
These are as follows:
- [x] Rename the blue and the red channels for the LEDs (R = B and vice versa
- [x] Place the blue channels on other pins to not inter…
-
Hi,
when setup in Automesh mode the ESPs AP has the same SSID as the uplink Router.
Is there a way to prevent devices from connecting to the ESPs AP due to the lower performance?
I want to use …
-
I use mt6701 sensor to replace with as5600, and get wrong pole pair value and electrical zero offset when call initFOC with default params, and the motor power(about 5W) is very high. I have to manual…
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
**Printer type** -
**MK4**
**Printer firmware v…
-
The `tf_listener_` member of `PCLNodelet` is only default-constructed, which means it uses a default-constructed NodeHandle. That means no `nodelet load` remappings have an effect on the topics the TF…
peci1 updated
4 years ago
-
Hi folks,
I came across an [article](http://krakow.naszemiasto.pl/artykul/krakow-sposob-na-smog-czujnik-jakosci-powietrza-dla-kazdego,3599038,artgal,t,id,tm.html) stating, that the cost of your senso…
-
Please add an option to position objects in a scene relative to other objects from an urdf file.
-
Hello, Mr. Reiniscimurs, I have done the test after training, bleow is the average reward function generated by my training of the improved method.In addition, I conducted tests on the original map, a…
-
# Proposed Functionality
Attach an ultrasonic sensor on the side of the robot to detect how far it is from the sidewall of the field. Based on this distance (aka the position of the robot), the ro…