-
Hello everyone, i’m sending telemetry data from my navio2+raspberrypi3 to my android device (qgroundcontrol) on tcp protocol, when i sent the video over 4g on udp protocol it greyed out and pixelate…
-
## Bug report
**Issue details**
The Vented Gauge type measures zero when pressure on both sides is equal. Currently the (enclosure internal pressure) offset is set to a constant value (standard …
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
_**Please be very s…
-
**Issue details**
_Please describe the problem_
since this cubes uses here3 GPS, CAN bus is enabled. with that hereflow is also connected and it work perfectly.
due to that, i2c bus is not worki…
-
#### Issue details
Needed Joystick via network functionality. So I read the ardupilot source code to find out where to incorporate this functionality.
As I was doing this, I found that someone else…
-
I'm using custom arducopter build which is not sending any pwm signals after pin 7. I connected servo to pin 9.
On first run (arducopter service running already) everything works well, second time I …
-
## Bug report
**Issue details**
In AP_Filesystem_Param.cpp::open(), r.read_size does not get initialized. It should be initialized to 0. If read_size happens to have a non-zero value, ::read(fd, b…
-
Hi to everyone! I have an Issue, when I want to run mavsdk on the NAVIO2, I have a problem it looks like this:
-function, the de…
-
Hello,
I am building emlid_navio2_cross using ubuntu 20.04 and when I upload to RPi and start px4 using `sudo ./emlid_navio2_cross/bin/px4` I get an error saying ```./emlid_navio2_cross/bin/px4: /l…