-
I'm having to work through a number of compiler errors. Is there a document anywhere indicating what libraries are required to be available in the IDE?
-
***EDITED***
Hi,
I have taken the controller card to my lab
Firmware: GS523DZR1B
Date(?): 20111006
(Labeled on the microcontroller)
The display (currently NOT connected) is: VL801D E8 SER DLX…
-
### The problem
I tried many config variations. since obviously incorrect one from documentation through many other variants from the network.
even reading the source code and help of chatgpt 4 …
-
### Description
So I am using Thonny and installed this library and ran the slave code with Wemos d1 mini esp8266, Wemos W600-pico and the Raspberry Pi PICO. The code ran fine with the Raspberry Pi P…
-
Hi,
I have compiled the code for a Wemos D1 Mini Board and connected all like the schematic.
After startup, on the serial Monitor I see:
Connected to WLAN01234
IP address: 192.168.1.226
RSSI: -6…
-
Hi,
I'm a fairly beginner in the esp scene but I have a project to use a old Razer Nostromo Keypad as a "programmable macro keypad"
But first I want to try with a dumb spare keyboard I have
I …
-
Unable to compile sketch in Arduino IDE, version 1.8.9
esp8266 board installed in board manager, all libraries as per Git repo installed.
error:
ParadoxAlarmSystemOTA:1:19: error: FS.h: No su…
-
### The problem
Enabling [`bme68x_bsec2_i2c`](https://esphome.io/components/sensor/bme68x_bsec2.html) on ESP8266 (D1 mini) triggers a boot loop. The exact same configuration using [`bme680_bsec`](htt…
-
Hi,
I was trying to use the library (blink example) with a WS2812 Eco and a Wemos D1 but it does not seems to be supported. No blinking at all.
If I try the same wiring with my arduino board, I …
-
I can reach the user page, the red lend on the RC522 its on. But when i aproach the tag nothing happen.
I have double checked the wires and have tryed another board (W1 wemos mini and NodeMCU), same …
beped updated
3 years ago