-
While the robot arm doesn't **look** like a traditional 3D printer or CNC machine, its actually very similar. It will need a G-code parser, a serial communications layer, motion planning and interpola…
-
Impossible to do moving the servo with many different firmware. Anybody can help. Maybe a bad configuration because I have plus the 3 pin in the corner (servo pin). Thks
-
I think I've gotten everything set up correctly, and the node app is seeing the arduino serial output, I'm getting all of the > > > and the hello world setup.
However, if I try to send gcode it doesn…
-
-
#### Description
I have stumbled across the following problem. If I have not interacted with CNCjs for a while, approximately one minute maybe, the Console widge will still receive my commands and …
-
### Summary Description
I didn't find in case how to connect 3D-printer Laser with Marlin firmware to meerk40t software
### Current functionality
_No response_
### Future functionality
_No respo…
-
Hello. Please advise me how solve below my problem
I made laser machine myself with grbl 1.1h firmware.
Everything fine, good working, But when i move X axis or Y even Z, under laserGrbl or other la…
-
After a lot of headaches checking and rechecking all the hardware and almost giving up. I have verified that there is a serious bug in the firmware.
If you repeat the same gcode file over and over ag…
-
### Version
2.0.20
### Hardware / Firmware
GRBL 1.1
### What happened
I might be doing something wrong, but I encountered this:
After Homing, when machine is at X0Y0Z0, if you press return to …
-
I am trying to connect my arduino mega 2560 via ugs but it says
"Connected to Grbl
The setup wizard does not know how to configure this type of controller.
It needs to be configured manually."
ple…