-
Please provide *general* feedback on your experience with the 1.8.0rc5 Release Candidate here. An "All is working fine" is valuable feedback as well, because it tells me that people in fact are te…
-
Hello please i need some help your plugin keeps tellling please wait, leaving current mesh. How to fix this problem? I am on flsun cube printer.
-
Thanks for any help.
## Problem description
Visualizer works fine with Platform Version, just gives a blank white window in Classic version.
### Expected Behavior
After loading a gcode fi…
-
### Steps to Reproduce
1. Set the hook on Autolevel
2. Press the Save button
3. Go to Terminal
4. Write M501 in terminal
5. Go back to EEPROM and u see the hook is gone
Happens also if u t…
-
### Bug Description
When using the mesh-leveling feature (latest `master`, built today), it's not possible to move the head down more than 0.2 mm (two times 0.1 mm).
### Steps to Reproduce
1.…
-
## Feature request
## Problem description
### Expected Behavior
### Actual Behavior
### Steps to Reproduce the Problem
1.
1.
1.
### Specifications
#### Version
…
-
### Controller Board
2 Axis pen/Laser
### Machine Description
2 Axis pen/Laser with a4988 driver
### Input Circuits
```yaml
for input pin I just put a push button for "macro0_pin: gpio…
-
### Controller Board
6-pack controller
### Machine Description
External Driver DM556T From Stepper online
Dual Y-Axis
End stops on all axes.
Spindle is dewalt DWP611
### Input Circuits
_No…
-
Hello,
In gSender EDGE preferences I selected automatic tool change with coordinates X=-2, Y=-862, Z=-86. Those are the machine coordinates of my BitSetter. I can jog the machine to those coordinat…
-
![double_webcam](https://user-images.githubusercontent.com/60020309/169401105-212c1205-94fa-4c94-b2aa-86b4b1be7939.png)
## Description
After initial boot, when I change tabs, a second webcam view op…