-
When I boot with `sdtv_mode=3` or use `tvservice -c "PAL_M 4:3"` I get 720x576 at 50Hz, but it should be 720x480 at 60Hz like NTSC, that's the correct format for PAL-M.
-
Some monitors are troubled with JTS18 analogue video output. Try this:
- [x] Check that HS length is like the original (VS already checked). The original screenshot is in the doc folder.
- [x] Com…
-
Hi, i have similar issue like https://github.com/ljalves/linux_media/issues/107
Modules built ok (followed local wiki howto), rebooted and there are frontends only at adapter2&3
Actual setup:
ubuntu …
-
Text file profile loading of "presets" to ease the complication of the new system for most users.
config would look something like this:
```
#Profile: Generic CRT (S-Video)
h_filter:Upscaling - …
-
### The problem
First thanks for the great Integration!! The Command "setting_memory" not function on my JVC NP5 Projector. All the other commands functionally fine.
### What version of Home Assista…
-
### Background: We want to link to sample mini-sites on amp.dev!
It would be really nice to have this up in time for I/O next week, since I'm doing a talk there on a new sample - AMP CAMP, the e-co…
-
First, make sure that none of the open and closed issues is about the same issue as you are describing, and make sure to check the frequently asked questions in the README file.
Then, replace the par…
-
JVC RA-E981B
ir-cui-FS2340-0000-0286_V4.5.13.707296-1A5
-
I am looking to see if the [JVC PTZ](https://github.com/bitfocus/companion-module-jvc-ptz) module could be updated to use the v114 API and to add compatibility for the [GY-HC900](http://pro.jvc.com/pr…
-
Hi My friends
I'm trying to make IR remote control receiver using atmega8 u controller, using atmel studio 7,
I've created the main file main.c and included the library header file, but when compili…