-
I have difficult to compile this on Arduino IDE. what SSD1306.h and HX711.h that it use?
-
I have just configured my KISS FC V1 with KISS 25A ESC and they all spin in the same direction. No matter the protocol or the yaw configuration. What's going on?
-
Hello,
I have a this [stack](https://www.drone-fpv-racer.com/kakute-f7-v15-tekko32-f3-4-in-1-esc-3773.html), but when I fly I have massive noise on the [video](https://www.youtube.com/watch?v=x0L5o…
-
Tested 3 different flight controllers (Flip32 F4, Revolt, SPF3) and 2 different esc's (Aikon20 & Bumpbee30) and get the same results on both Betaflight and Raceflight. Throttle calibration will not s…
cturn updated
6 years ago
-
From https://github.com/bitdump/BLHeli/blob/master/SiLabs/EMAX_Lightning_20A.inc I see that MCU_48MHZ is not enabled, but it has F390 MCU like FVT Littlebee (https://github.com/bitdump/BLHeli/blob/mas…
-
If I set `SYS_USE_IO` to `0` on a Pixhawk 6X, I no longer receive RC.
```
nsh> rc_input status
INFO [rc_input] Max update rate: 250 Hz
INFO [rc_input] UART device: /dev/ttyS5
INFO [rc_input]…
-
Hi There,
I have a flywoo explorer LR4 analog with crossfire nano RX. I swapped my VTX out because I damaged the connector. I installed a TBS unity pro 5G8 HV SE (MMCX) and it works fine. now I can'…
-
### Describe the bug
The copter does randomly disarm in flight and it looks like the flight control is frozen. Unplug and connect it again does make it working again. The hardware must be okay, becau…
-
Sometimes pdb noise make signals like legacy PWM, So it make motors run without command and it make some injury.
And so many users select digital protocol for most ESC, So new option is needed, I gue…
-
## Current Behavior
Hello! During my last test flight with a fixed-wing aircraft using a gimbal and a head tracker, I experienced a total loss of control. The onboard recorded video is frightening.
…