-
One of the Y axis moves slower than the other causing issues during prints. I have no clue where to go from here.
`/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https:…
-
I want to call nav2_bringup in my launch file. I use ros2 humble. When I make the call I get the error message:
```
arad2456:~/ros2_ws$ ros2 launch slam_train slam_algorithm.launch.py
[INFO] [lau…
-
-
@MihirDharmadhikari Thanks for the excellent contributions.
Currently we are trying to deploy this package with real robot (SPOT) and currently able to get it work as it shown in the image.
We ar…
-
What is this repo for?
-
Cannot get the TFT35 touchscreen to work with octoprint using a MKS GEN L?
When removing the touchscreen, octoprint works normally.
How to fix this problem
-
I'll try my best to explain this, the beta firmware you've provided, unless I've missed something, doesn't have the BigTreeTech 32 bit SKR V2.0 board, so I had to download the newest 2.0.9.2 marlin fi…
-
Hello,
When working on a FieldFriend robot of an older version - Not sure if its a version label, but it says zauberzeug@rb26 in the terminal - the robots manual steering is very delayed.
I.e. t…
-
Hi . I wired everything like shown up but get TMC Connection Error in Display. Checked via Pronter 3 TMC2008 get a Connection But the 4. Has bad Response All to low. Can sw Help pls . I used BT…
-
I just recently got the SKR V1.3 for the wiring simplicity and 32 bit stuff. Sadly, this has also created a few issues. The SPI jumpers are in the correct places and the +5V is in INT like it is suppo…